Just wondering if adding a clevis lift and some extra isolators to the rear if that would be too much lift for the cv's?Al told me to just add some extra grease to them but wanted to gety some other opinon's of people who might already have that configuration.I want to be able to get 31 /10.5's under it without any rubbing at full lock.

_________________
2003 liberty sport v-6 5spd
light khaki
frankenlift
als arm's
rusty'sdiff cover
rusty's lower rear arms
rusty's skids and custom shackle's
rusty's rock rails
rusty's air tube
magnaflow exhaust
trueflow cone filter
throttle body spacer
oem renegade fog light's
bf goodrich 245/75/16 all terain ko
16X8 cragar black d's

Rear will not be a problem. I'm running two extra spacers with my CRD Frankenlift. The front not so sure I've heard people bicker both sides of the argument. What do you CV's look like now?

Jason

_________________
Now: "07 steel blue JK Rubicon 2dr
4.5" Rubicon Express lift
rolling on 35"x12.5" Xtreme MT's
Warn M8000 winch
On board Air
Ham radios
Skidrow and kilby skids

Former: '05 Patriot Blue CRD. Lifted, locked, and a few other toys.

They are slightly angled but have no problem with them at all.I was sorta concerned with the rear because I herd that the rear ball joint can breakdown faster with to much rear lift.

_________________
2003 liberty sport v-6 5spd
light khaki
frankenlift
als arm's
rusty'sdiff cover
rusty's lower rear arms
rusty's skids and custom shackle's
rusty's rock rails
rusty's air tube
magnaflow exhaust
trueflow cone filter
throttle body spacer
oem renegade fog light's
bf goodrich 245/75/16 all terain ko
16X8 cragar black d's

What rear ball joint? I don't think you need any more height, you need some spacers (and enough rear isolators to level her out)

_________________
+
My opinions & advice are taken at your own risk.
+
2002 Patriot Blue KJ - Coming soon!
2006 Black LJ (Wrangler Unlimited), auto, custom skids, 3.5" Rubicon Express, Aussie D30, Rocker Guards & Cooper AT3 235x85r16
2009 Patriot Blue D2500, 5.7L Hemi, 4x4, Quad Cab
1967 Alberg 37' Masthead rigged Sloop

There is a ball joint on the tri link or what some call wishbone on top of the rear axle.

_________________
2003 liberty sport v-6 5spd
light khaki
frankenlift
als arm's
rusty'sdiff cover
rusty's lower rear arms
rusty's skids and custom shackle's
rusty's rock rails
rusty's air tube
magnaflow exhaust
trueflow cone filter
throttle body spacer
oem renegade fog light's
bf goodrich 245/75/16 all terain ko
16X8 cragar black d's

i have 31x10.5 on 15x8 wheels

no rubbing at all in the rear, although im going to get a new rear bar so i can push them back into the center of the wheel well again.....did you rustys work well for htat?


but in the front , if you havent already you will need to pound out the pinch weld, and mine rubbed a lot on the front of the wheel well fender lining..... i have so far cut most of it out , but full lock turning the wheel right in reverse still rubs a tad , so i have to cut a bit more....

also i took off the bottom piece of the front valance


but i dont mind ripping up the lining or the bumper because i am going to get an ARB / RL soon

_________________
1998 Audi A4 1.8tQ

1990 Mazda Miata

"Remember when the platform was sliding into the fiery pit and I said 'Goodbye' and you were like 'NO WAY' and then I was all 'I was just pretending to murder you'? That was great."

I did the pinch weld and removed the lower air dam and cut the fog light flaps out plus alittle extra.As far as the rear I removed my sway bar when installing the lower arm's for better articulation and it actually rides well without it.I just want alittle bit more clearance

_________________
2003 liberty sport v-6 5spd
light khaki
frankenlift
als arm's
rusty'sdiff cover
rusty's lower rear arms
rusty's skids and custom shackle's
rusty's rock rails
rusty's air tube
magnaflow exhaust
trueflow cone filter
throttle body spacer
oem renegade fog light's
bf goodrich 245/75/16 all terain ko
16X8 cragar black d's

oops i actually meant the rear control arms, not sway bar

anyways.....sounds like it might fit, im not 100% because i only have 15"s , but try it out , why not?


i dont think you need any more lift tho

_________________
1998 Audi A4 1.8tQ

1990 Mazda Miata

"Remember when the platform was sliding into the fiery pit and I said 'Goodbye' and you were like 'NO WAY' and then I was all 'I was just pretending to murder you'? That was great."