I just installed an 06 Liberty EVIC in my 06 and everything worked great (tested remote keyless entry and settings of EVIC) UNTIL... I changed one of the setting on the EVIC... I changed (auto unlock on exit to YES from NO) when I did that and shut off the car and opened the doors ALL the doors unlocked like they were supposed to... I went to lock the doors with my keyless remote and NOTHING... tried UNLOCK... NOTHING... The remotes now DONT work! The only way they work now is if I have 1 key in the ignition with the car on and then I use the other remote... THEN all the features work... I tried changing the setting on the EVIC back (auto unlock on exit to NO from YES) and still NOTHING!!! Does ANYONE have any suggestions??? If I disconnect the battery long enough will it RESET the computer??? (how long to I have to leave it disconnected if that is the case?) What should I do?!?!?

PLEASE HELP!

THANK YOU!
Jonathan

_________________
2006 Liberty Sport Special Edition
65th Anniversary Package
Off Road Package - Full Skids / Tow Hooks
Power Sunroof
RB1 Nav w/ Infinity Sound System
Mopar Rear 6CD Changer
Mopar 2-way Remote Start
Mopar Subwoofer
Mopar Taillight Guards
Mopar Slush Mats
Mopar Renegade Light Bar
Mopar Renegade Roof Basket
Cobra 19 DX CB
L.O.S.T # 025482

I would leave the battery disconnected for about 20min. Or/and you can somehow connect the ground wire directly to the ground.

If you look in your manual there is a section that tells you how to reprogram your keys.

Were you able to ship my evic yet?

Daniel

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's