Reputable 4x4 shops???

pixeldzn · **Posted:** Sun Mar 25, 2007 8:58 pm

jeepfrog wrote:

Thanks for the input, guys. Things are making a bit more sense now. I have 2 top plates for the rear assembly already. So, I would just need 2 more plates for the front assemblies, right? (Sorry for the newbie q's, I just want to make sure I get it right before the install.)

Well the plates for the front are a whole lot different than the trim packers you probably have for the back.

Just ask for the front suspension assembly top plates and you should get what you need. If you call Heather at All J and ask her for the daystar ones, what you get will work for sure.

jeepfrog · **Posted:** Sun Mar 25, 2007 9:07 pm

Thanks! I'll give All J's a call this week.

FreeJeep · **Posted:** Mon Mar 26, 2007 4:08 pm

Top plates for the rear assemblies??? I've never seen top plates for the rears. Based on prior posts, I think the top plates you have are for the front. Post a pic of the pieces you have. That might clear things up a bit.

DonC

jeepfrog · **Posted:** Mon Mar 26, 2007 8:50 pm

OK, here are pics of what i have for the Rusty's lift:

Full kit:

Strut plates:

pixeldzn · **Posted:** Mon Mar 26, 2007 9:30 pm

Yup. Those plates are for the front alright.

YTou have everything you need to get those fronts preassembled. Take everything but the fatter springs and the OME shocks to a mechanic and ask them to assemble. Should be a quick job for someone with an industrial compressor setup.

jeepfrog · **Posted:** Mon Mar 26, 2007 11:02 pm

Great! Thanks again for the technical help.

Reputable 4x4 shops???

Who is online