Will the install work ok using one solid piece of hose ea. top and bottom, or will I need to install elbows? Someone has a pretty picture with clear hose on here, but 1. I can't find it and 2. it didn't show the whole hose.

Will I need to fasten it to the car, or can I secure it randomly with some nylon ties?

_________________
2006 Dk. Khaki Limited (BD 4/18/06)
-Mopar Tow Pkg. and Skids
-Magnaflow
-Fumoto Valve
-Provent 200, ORM
-Rotella T 5w/40
-V6 Air Box
-245/70/16 Cooper Discoverer CTS
-Amsoil EAA201 air filter

The elbows make a neater install - but they aren't required - if you go with 1 piece hoses make sure you don't kink them in the bends or when you put the engine cover on (if you put the engine cover on) - blocked hoses are bad - I don't remember the error - but it will cause a problem.
(most of the hoses are 3/4" and the Provent is 1" openings so you do need reducers)
If everything is routed right it doesn't really have room to move - so ties may be overkill - but they might help with keeping the tubing bends routed correctly, so they won't hurt.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur