Picked up OE replacement sensor from Jeep Dealer. Made by BOSCH.
Plan on having a spare before cleaning the one on the rig.

# 0 281 002 437 -Original part # on sensor on engine
# 0 281 002 845 -New sensor, also BOSCH

I asked the parts manager if this was the correct one?, yes.
Specs on this sensor? Don'y have, can't get.
I called Bosch and asked for specs. An engineer called back and said
they don't have the specs. Said it was specific to Chrysler and I would have to call them.
Oh, and bye the way he said, The 845 is NOT interchangable with the 437.
Called Chrysler, they said to ask Jeep Dealer. Back to where I started.
I thought this would be of interest because if you get a new 845, what are you going to do?
Now, I do have the specs on the 437.
Does anybody have or know where I can find the specs on the 845?[/b]

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

Do you have a scan guage or similiar? It would be intereting to see readings under operating conditions on both sensors. Let us know

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)

It's just a superceeded part number if memory serves me correctly. Although the P/N changes, the sensor itself is internally the same and has been since the introduction of the same engine in the RG application (minivan) and the KJ back in '02 i believe. No worries, if it plugs in it'll work just fine.

Thanks MrMopar64!

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

DocB, how much did the part cost?

_________________
2006 CRD Sport

GilaMonster, list $48, discount $43, tax $3= $46
About the same as online.

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

Well, decided to pull mine as well, just curious how it would look after 20000KM.

...Was plugged solid,
Also used ULSD pretty much since new, so no improvement over regular diesel by the looks of it.

Just pulled the MAF sensor, we'll see if it stays clear!.

-Gab

_________________
2006 CRD Limited, Manfufactured Dec 13/05