If I were to do a clevis lift and add rusty's strut plates, does anyone foresee any problems down the road? I realize this would only be giving me 1 to 1.25 inches of lift depending on the numbers of conduit nuts I use on the clevis. Thanks for the help.

_________________
Sold the Audi, bought an '05 Sport
OME rear and front hybrid lift
245/70-16 Destination AT

All depends on the number of conduit nuts you use. You wouldnt have any problems using the rustys plate, but you will if you add to many nuts.

Youre working with stock suspension, right?

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

I have a 3/8" clevis lift and the strut plates along with the coil lift from rustys and no issues. I did need to slap on Al's a-arms though because in offroad situations the a-arms would smack the spring. But you will be more than fine with only the stock suspension and those mods.

_________________
LIBERTY or DEATH

2005 Sport with "STUFF"

Yes, I have stock suspension

_________________
Sold the Audi, bought an '05 Sport
OME rear and front hybrid lift
245/70-16 Destination AT