KJ Bumpers - A look at four

lilmatty · **Posted:** Thu Jul 27, 2006 8:55 pm

Parked in a mall, too. :-)r

jpzkj · **Posted:** Thu Jul 27, 2006 9:27 pm

lilmatty wrote:

Parked in a mall, too. :-)r

DarbyWalters · **Posted:** Thu Jul 27, 2006 11:13 pm

lilmatty wrote:

Parked in a mall, too. :-)r

Ha Ha Ha...that was the First Official L.O.S.T. run...the mall is about .5 miles from Devil's Den...we have 8 KJs and some other Jeeps with us. Went from there to Cibilo Creek in the afternoon.

Ted (USACop) decided to follow me between two tight ridges up a 65% slope...He completely destroyed his stock step rails...he just ripped them off and continued on his way...

XJJeepGirl · **Posted:** Thu Aug 03, 2006 6:38 pm

I think I like this one the best but don't know where to get one

Catherine

2006KJSPORT4x4 · **Posted:** Thu Aug 03, 2006 7:12 pm

From what I hear that is a one off bumper for that outfitted KJ...not available to the public....would be sweet if it were though....

OzLtd · **Posted:** Thu Aug 03, 2006 11:29 pm

IT wouldnt be hard to replicate that bar + do a little extra to the top section. Just need a good fab shop. THere's enough pics of it lying around here to use as plans.

XJJeepGirl · **Posted:** Thu Aug 03, 2006 11:50 pm

I like how they flipped the warn winch upside down to mount it in the bumper. I think that's what TR should have done as well.

Catherine

USAFCOP · **Posted:** Thu Aug 03, 2006 11:55 pm

DarbyWalters wrote:

lilmatty wrote:

Parked in a mall, too. :-)r

Ha Ha Ha...that was the First Official L.O.S.T. run...the mall is about .5 miles from Devil's Den...we have 8 KJs and some other Jeeps with us. Went from there to Cibilo Creek in the afternoon.

Ted (USAFCop) decided to follow me between two tight ridges up a 65% slope...He completely destroyed his stock step rails...he just ripped them off and continued on his way...

Hey, that is what we do right... Rip it off and press on!! Then build rock rails! :twisted:

AdamIsAdam · **Posted:** Fri Aug 04, 2006 8:45 am

I like the black bars that hang down in front of the front suspension. I've wondered if I should be concerned about that exposed front end with my ARB.

lilmatty · **Posted:** Fri Aug 04, 2006 10:28 am

RockyMtEditionKJ wrote:

From what I hear that is a one off bumper for that outfitted KJ...not available to the public....would be sweet if it were though....

I believe that's the Liberator, a concept vehicle from DC.

DarbyWalters · **Posted:** Fri Aug 04, 2006 11:50 am

USAFCOP wrote:

Hey, that is what we do right... Rip it off and press on!! Then build rock rails! :twisted:

That is how we do it in San Antonio...those darn things took all day and weighed a Ton... :lol:

va03liberty · **Posted:** Fri Aug 04, 2006 11:37 pm

not sure if this is the correct place to ask this.. but since you are all talking about bumpers i was just wondering if anybody saw the article in 4 wheel drive and sport utility magazine about the new bumper for the liberty that holds a warn 9.5 ti winch.. if so any thoughts i have a 2003 and likeing this bumper.. just looking for some opinions...

OzLtd · **Posted:** Sat Aug 05, 2006 1:42 am

va03liberty wrote:

i was just wondering if anybody saw the article in 4 wheel drive and sport utility magazine about the new bumper for the liberty that holds a warn 9.5 ti winch.....

Got any pics / links ?

va03liberty · **Posted:** Sat Aug 05, 2006 2:10 am

i just saw the article today.. sorry i am not all that handy on the pics thing.. can just tell you they do have pics in the article and i must say it looks really sweeeeeeeeeeeeet

0311_DoC · **Posted:** Tue Jul 17, 2007 11:30 am

DarbyWalters wrote:

Or 5...my old TrailReady front (had the rear too but no pics)...Tuff bumper...not light but if you change the cable to rope with a rope type fairlead you lose 30# off the front end...Never know if TrailReady will ever make these again (Think they only made 4-5)
The Bull Bar leans forward which I liked...I don't like the rear tilt type bar on the ARB

Quote:

here ya go, i found one

Tokyojoe · **Posted:** Tue Jul 17, 2007 11:01 pm

Looks good without the stupid light guards but....you definitely would have to remove the spare from the back.

Fouros · **Posted:** Thu Jul 19, 2007 2:33 am

got any side on shots of the Trailready bar????

wanting to look at how far out that sucker sits, and i am wondering if the OEM foglights will fit in the recesses?????sp :oops:

HMMMMMM i am wondering what freight would be to Australia :twisted:

0311_DoC · **Posted:** Thu Jul 19, 2007 3:02 am

Fouros wrote:

got any side on shots of the Trailready bar????

wanting to look at how far out that sucker sits, and i am wondering if the OEM foglights will fit in the recesses?????sp :oops:

HMMMMMM i am wondering what freight would be to Australia :twisted:

I could email you the pics that TR sent me. Im at work and cannot upload them on here.

Fouros · **Posted:** Thu Jul 19, 2007 3:08 am

pm'd you my email address

Neatus · **Posted:** Thu Jul 19, 2007 9:21 pm

DarbyWalters wrote:

That is my old KJ...traded for a CRD...darn it looks pretty good :lol:

Never had a problem with air flow in Texas Heat either!

Darby, your KJ was the reason I wanted one. I saw it on the old site way back in the day and wanted mine to be just like it. I still have the www.kjjeep.com sticker on mine! Old school :roll:

KJ Bumpers - A look at four

Who is online