Guys I'm in line to buy Andys front Frankenlift off him. What will I need for the back, where will I go about getting half a kit, and about how much $ will it cost? Do these look in good shape? I just need some advice...

Looks like a great deal, You can buy the rear of the Frankenlift from AllJ's.

_________________
2005 CRD , Moab Rims, 245/75/16 Goodyear M/T
RL rear bumper, TMJ Front bumper, Frankenlinft,
*TOTALED*

1985 Mitsubishi Pickup SP 2.3 Turbo Diesel Watercooled turbo,4D56 ported head,
12" Suspension Lift with JK Rubicon axles, Elockers, 5.13's, Fox coilovers, Atlas 5.0, Rock Lizard supersliders

1996 Lexus LX450 -locked and lifted-

Or buy a set of Ranchos for 100 bucks from Summit Racing, my Daystar spacers for 75 shipped and you are good to go. Or you can buy new springs for 150/shocks for 100 plus, just something to think about!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

So we're talking about $500 for a full kit?

That's like super cheap.

Spend the money and do it right the first time,the cheap way will be more expensive in the long run,so that makes a $1000 Franki and $400 Al's arms to start with way cheaper then trying to be cheap to start with.

I have a set of 2.5", old style, Skyjacker rear springs. They will net you 2-2.5" depending on the weight on them.
I ran them w/ some RSX's and never had a problem w/ them.
$50 plus whatever USPS says shipping is.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal