Does anybody have a make/model number for the 4.10 ring and pinion for the D30A? My gear guy says the ones I got will not fit (off ebay-"guaranteed to fit" after clarifying it was a D30A and not the D30 ). Please dont tell me to look for a 4 cyl KJ front diff, because they are harder to find than a virgin on a porno set.
thanx

_________________
The only place worth posting Husky mats and tow hooks mods.

HAHAHA..!!

You can check your local dealer **probably a HUGE rip-off** or check out this OEM Mopar retail site: clicky

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650

That's what you get for using Ebay,all they do is rip poeple off on Ebay.Check with Unixxx,he got some gears for the Dana30A from somewhere for a reasonable price.I just said screw it and got a whole new diff with the 4.10's already installed.

My dealer knows when he sees me coming its only to get an OBD code that my scanner does not pull, like ABS crap, or some obscure part I cant get anywhere else. $469-no thanks. I had that feeling in my gut that the guy I bought the ring and pinion from had no idea that there was a difference between the dana 30's so I asked and he was positive it would fit. Unixx's site only has 8.25 gears listed. I may just call Reider Racing and ask what Gris ordered since I know his real name.

_________________
The only place worth posting Husky mats and tow hooks mods.

Somebody (I think Moose) posted this link for a source of 4:10 gears, said they were lower price than DC and they get the D30a's directly from Dana Spicer. Make sure you ask specifically for the Liberty D30a and the longer pinion. Not the same as the D30. the gears you want are not listed on the website. You must call.

http://reiderracing.com/

I don't have any experience with this company so don't take my word, but I did bookmark this cause I have plans....

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

What would a junkyard charge for a D30A from a 4 cylinder KJ that has the 4.10s?

_________________
===
New KJ Gear - Desert Armor Flak

2004 Renegade Light Khaki - 4" JBA Lift - Rock Lizard Products: Komodo Dragon Rear Bumper, Prototype Winch-mount Front Bumper, Super Skink Sliders - All J's Super Tranny Skid II - 31" Firestone Destination AT's on Moab wheels - Cobra 75W CB w/ stock Antenna mod

[b]Retired, US Military

wish I could find one in a junkyard!

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

There will be one for sale in a few months***cough***,good condition***cough***,with a TT installed***cough*** .

Hmmm...

_________________
2006 Renegade
Army Green

Frankenlift, Al's Arms
245/75R16 KM2s on Moabs with Monster Valves
ARB Bull Bar, WARN M8000 winch, IPF 900XS driving lights
Rock Lizard Rear Bumper, Super Skink Sliders, and roof rails
Defender Roof Rack
Powertank

And a***cough***rear 8.25***cough*** with matching 4.10's***cough***with a ARB .

Dave, call Reider Racing. They can get the Dana mfged gears that Chrysler uses except hellofalot cheaper. That is what I used for my regear.

http://reiderracing.com/


Calling them is the best bet.

_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!

cough, cough, cough
tjkj, you gotta lay off what ever it is you are smokin'
Oh PMd you by the way

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Hmmm...someone closeby with 4.10's.

_________________
===
New KJ Gear - Desert Armor Flak

2004 Renegade Light Khaki - 4" JBA Lift - Rock Lizard Products: Komodo Dragon Rear Bumper, Prototype Winch-mount Front Bumper, Super Skink Sliders - All J's Super Tranny Skid II - 31" Firestone Destination AT's on Moab wheels - Cobra 75W CB w/ stock Antenna mod

[b]Retired, US Military

Reider Racing Dana 30a 4.10's for $160 on the way.

_________________
The only place worth posting Husky mats and tow hooks mods.

Glad to hear it. Hopefully they didn't confuse themselves and sent the right ones. I think you'll be fine. I spent more time arguing with them that the gears they though were the right ones, WEREN'T, before I finally listened to them and accepted the fact that Dana gears marked for a KJ might actually work. It took him saying it's the exact samepart # Dana sends to the dealer for the Dealer part# I supplied.

They got here, they worked. wee!


Price can't be beat either.

_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!

Wow, that is a good price!! I'm on it

_________________