Is Skid Row the only source of skid plates for 2003?

Guest · **Posted:** Tue Oct 16, 2007 4:29 pm

All J no longer has a super skid, Rusty's no longer has the engine/transmission plate, MOPAR is not making them any more...

Skid row has them, but they are expensive!

Are there any other options? You Rock Lizard guys gonna make something to fill the void? I'm finally ready to buy, & the whole market goes away!!!

0311_DoC · **Posted:** Tue Oct 16, 2007 4:49 pm

well it sure would be another market for RL if thats the case........

Jeepjeepster · **Posted:** Tue Oct 16, 2007 4:50 pm

0311_DoC wrote:

well it sure would be another market for RL if thats the case........

wonder if he knows that yet? Hes swamped anyway(which is good I think), so it would probably be awhile anyway.

0311_DoC · **Posted:** Tue Oct 16, 2007 4:52 pm

Jeepjeepster wrote:

0311_DoC wrote:

well it sure would be another market for RL if thats the case........

wonder if he knows that yet? Hes swamped anyway(which is good I think), so it would probably be awhile anyway.

looks like its time to hire some more help, get that payroll ready

Rock Lizard · **Posted:** Tue Oct 16, 2007 5:15 pm

KJpilot wrote:

You Rock Lizard guys gonna make something to fill the void?

If your waiting on me, your going backward. :twisted:

I actually do have something in mind. It will be based off of my SFA belly pan, just without the control arm mounts. It will be a complete replacement crossmember, with removable sections that cover the TCase and the Engine/Tranny area to the front crossmember. Also have a front skid on the "list" since you can't get those from Skid Row anymore either. All this will be in my "Tortoise Skids" lineup when it comes out. Hope your not in a big hurry, because as mentioned, I'm slammed right now. Just one of those products coming in '08.

riptricket · **Posted:** Tue Oct 16, 2007 5:28 pm

i can get you a super skid... it is brand new!

JJsTJ · **Posted:** Tue Oct 16, 2007 5:40 pm

KJpilot wrote:

All J no longer has a super skid, Rusty's no longer has the engine/transmission plate, MOPAR is not making them any more...

Skid row has them, but they are expensive!

Are there any other options? You Rock Lizard guys gonna make something to fill the void? I'm finally ready to buy, & the whole market goes away!!!

Which year did you need it for? Last time I was up at All J's they still had some of the earlier ones IIRC.

carroll952 · **Posted:** Tue Oct 16, 2007 5:42 pm

JJsKJ wrote:

KJpilot wrote:

All J no longer has a super skid, Rusty's no longer has the engine/transmission plate, MOPAR is not making them any more...

Skid row has them, but they are expensive!

Are there any other options? You Rock Lizard guys gonna make something to fill the void? I'm finally ready to buy, & the whole market goes away!!!

Which year did you need it for? Last time I was up at All J's they still had some of the earlier ones IIRC.

I believe he needs one for a 2003. At least that's what his topic says.

Guest · **Posted:** Tue Oct 16, 2007 5:59 pm

JJsKJ wrote:

KJpilot wrote:

All J no longer has a super skid, Rusty's no longer has the engine/transmission plate, MOPAR is not making them any more...

Skid row has them, but they are expensive!

Are there any other options? You Rock Lizard guys gonna make something to fill the void? I'm finally ready to buy, & the whole market goes away!!!

Which year did you need it for? Last time I was up at All J's they still had some of the earlier ones IIRC.

Yup, a 2003. the web site says they have 4 left, but they actually have none.

Guest · **Posted:** Tue Oct 16, 2007 6:03 pm

riptricket wrote:

i can get you a super skid... $280 and then shipping if anyone wants it. it is brand new!

You got mail!

Guest · **Posted:** Tue Oct 16, 2007 6:05 pm

Rock Lizard wrote:

KJpilot wrote:

You Rock Lizard guys gonna make something to fill the void?

If your waiting on me, your going backward. :twisted:

I actually do have something in mind. It will be based off of my SFA belly pan, just without the control arm mounts. It will be a complete replacement crossmember, with removable sections that cover the TCase and the Engine/Tranny area to the front crossmember. Also have a front skid on the "list" since you can't get those from Skid Row anymore either. All this will be in my "Tortoise Skids" lineup when it comes out. Hope your not in a big hurry, because as mentioned, I'm slammed right now. Just one of those products coming in '08.

My Father-in-law has one of the first ones you made on his XJ. that thing is nice!

Dje Ryu · **Posted:** Tue Oct 16, 2007 9:33 pm

Rock Lizard wrote:

KJpilot wrote:

You Rock Lizard guys gonna make something to fill the void?

If your waiting on me, your going backward. :twisted:

I actually do have something in mind. It will be based off of my SFA belly pan, just without the control arm mounts. It will be a complete replacement crossmember, with removable sections that cover the TCase and the Engine/Tranny area to the front crossmember. Also have a front skid on the "list" since you can't get those from Skid Row anymore either. All this will be in my "Tortoise Skids" lineup when it comes out. Hope your not in a big hurry, because as mentioned, I'm slammed right now. Just one of those products coming in '08.

darn, you're gonna force me to buy skids twice. I need whatever I can get right now but, I know I'll probably need new ones by the time yours are available (I'll order early this time

) Again, thanks for producing stuff for our grocery-gettin' chick Jeeps. :lol:

jsc7002 · **Posted:** Tue Oct 16, 2007 9:37 pm

KJpilot wrote:

All J no longer has a super skid, Rusty's no longer has the engine/transmission plate, MOPAR is not making them any more...

Skid row has them, but they are expensive!

Are there any other options? You Rock Lizard guys gonna make something to fill the void? I'm finally ready to buy, & the whole market goes away!!!

lol well stop looking b/c i havent gotten all mine yet! :lol:

nlife · **Joined:** Thu Aug 16, 2007 11:43 pm **Posts:** 226

KJpilot wrote:

All J no longer has a super skid, Rusty's no longer has the engine/transmission plate, MOPAR is not making them any more...

Skid row has them, but they are expensive!

Are there any other options? You Rock Lizard guys gonna make something to fill the void? I'm finally ready to buy, & the whole market goes away!!!

All J's has ONE Super Skid I left. I just got off the phone with them.

N

0311_DoC · **Posted:** Tue Oct 23, 2007 1:46 pm

sure hope they didn't sell mine, supposed to be getting it on Monday with my lift

nlife · **Joined:** Thu Aug 16, 2007 11:43 pm **Posts:** 226

0311_DoC wrote:

sure hope they didn't sell mine, supposed to be getting it on Monday with my lift

Dunno. They didn't have the hardware for the one they do have left and would have had it all together tomorrow. I ordered a Skid Row front skid but was tempted to pick up the tranny skid too. Just don't have the $$$ for both, plus the money for the repairs needed right now.

N

CRDhappy · **Posted:** Tue Oct 23, 2007 5:41 pm

Just called AllJ and got lucky and got the last one. They said they were all out a couple of weeks ago, but I'm glad they had one more for whatever reason... I'll get it next Monday when I'm down there for my Frankenlift.

0311_DoC · **Posted:** Tue Oct 23, 2007 5:48 pm

Guess Ill see you there on Monday. Looks like we are getting the same set up :wink:

we will have to take pics of them sittin next to each other.. Man this week needs to hurry up......

nlife · **Joined:** Thu Aug 16, 2007 11:43 pm **Posts:** 226

CRDhappy wrote:

Just called AllJ and got lucky and got the last one. They said they were all out a couple of weeks ago, but I'm glad they had one more for whatever reason... I'll get it next Monday when I'm down there for my Frankenlift.

I spoke with the All J staff this morning and had it on order bright and early, then realized that it was the tranny skid and I need the front skid. I canceled the order and am having them ship me a Skid Row front skid so I don't experience this again....

It's going into the shop tomorrow for repairs. Can't wait to get the libby back on the road. I'm tired of driving that crappy little festiva. The only redeeming quality is the gas milage. 36+ MPG, but I'd still rather drive my libby!

The ladies at All J were all VERY friendly and great to talk to. It was fun to tease them about the STRONG CANADIAN DOLLAR! 1.035 to a green back. Here's a Canadian dollar. Which one of you chaps wants to serve me breakfast? HAHAHAHA! J/k "ya'll"

N

Is Skid Row the only source of skid plates for 2003?

Who is online