Lift Party/ Help possibilities.......

broncsrule · **Posted:** Fri Oct 26, 2007 9:37 am

I just recieved some shiney red UCAs and a Frankie front. Does anybody have experience putting this stuff on the Jeep? This is above the level of mechanics I have ever tackled. I would of course be able to provide food, beverages, and whatever else needed.......Let me know if there are any takers out there!

SethX9 · **Posted:** Fri Oct 26, 2007 1:12 pm

A friend of mine and I put the Frankenlift in my old Liberty over the course of a weekend. The rear took about 1.5 hours...the front took all dang day! I don't have the aptitude to help you by myself but if there's a shindig organized and work isn't on fire I'd be happy to throw a greasy elbow into the mix.

corwyyn · **Posted:** Fri Oct 26, 2007 2:07 pm

I did my Daystar install by myself - took a day and a half but I was going slow and figuring things out as I went along. Later on I installed a UCA on the drivers side to replace the one I had torn the ball joint boot on

That took a couple of hours but again I was figuring things out as I went. I'd be happy to help with a lift party depending on when it is, Sundays usually work better for me since I've been working OT most Saturdays. At least we're into the nice wrenching weather

oldhockeyvb · **Posted:** Fri Oct 26, 2007 7:11 pm

I'm willing to help although I've not done it before. Problem is I am booked solid the entire month of november. Any other time and I'm interested.

M&P40 · **Posted:** Fri Oct 26, 2007 8:38 pm

i installed my UCAs and frankenlift and would be willing to share my knowledge and ability if it fits in my schedule. i am generally off on thursdays and every other weekend. it could take 8 hours but probably not that long. just know i am a cardinals fan;) let me know if you want to take me up on the offer.

broncsrule · **Posted:** Sat Oct 27, 2007 3:20 pm

Thanks everybody for your offers of help.

M&P40- I would really like to take you up on your offer. I am off on weekends, so just let me know when is good for you. I am not sure if I have all the tools required. I do have a garage and with a little adjusting, (we just moved in) there would be enogh room. just let me know whereand when is best for you.

My offer is still out to any others that would also like to join in the festivities.

SethX9 · **Posted:** Sat Oct 27, 2007 5:26 pm

Somewhere here on L.O.S.T. is a detailed step-by-step install doc for the Frankenlift. There are only a few absolute must have tools and a few more that make the job easier. I'll look around and see if I still have the printout from my install but it's been a couple of years.

corwyyn · **Posted:** Sat Oct 27, 2007 6:01 pm

Miah's frankenlift write-up

Pablo · **Joined:** Thu Feb 02, 2006 10:06 pm **Posts:** 1201

broncsrule wrote:

Thanks everybody for your offers of help.

M&P40- I would really like to take you up on your offer. I am off on weekends, so just let me know when is good for you. I am not sure if I have all the tools required. I do have a garage and with a little adjusting, (we just moved in) there would be enogh room. just let me know whereand when is best for you.

My offer is still out to any others that would also like to join in the festivities.

PM me for the time and maybe I can make it. I am in Queen Creek, which is not far from Chandler and I have some tools. I am hoping to help someone else out this month with an Frankenlift CRD install, so I can't promise I can help. Plus I have a lift pump, SEGR, CAT Fuel Filter adapter, tranny cooler, fuel-filter bleeder valve, and soon a snorkel and instrument pod with gauges laying around to install. That is assuming I finish the rock rails today (only got two hours help from a friend two weeks ago and am have wisely decided to wait for help instead of dealing with the rail hitting me in the head).

I have done the Frankenlift / Al's arms on the CRD though, so it can't be harder on the gasser (which has more room to work and wiggle).

M&P40 · **Posted:** Sat Oct 27, 2007 8:45 pm

paul you always have the coolest toys!!

broncos i sent you PM

Signcutter21 · **Posted:** Sat Oct 27, 2007 10:03 pm

Jim,
long time no see. Do's this mean you'll be coming out to play more often? How is everything. Last time I saw you was the night or so before you new baby was born. Hope all's going well up that way. see ya soon hopefully. mike

broncsrule · **Posted:** Sat Oct 27, 2007 10:57 pm

Mike- Yes I will be out playing again soon. I havn't gone lately because my struts are just about gone. Time to upgrade. So i will need to break in those springs right away! Looking forward to the November run to the border for sure.

broncsrule · **Posted:** Thu Nov 01, 2007 8:53 am

M&P40-- Saturday is coming fast

. Are we still on? I pm'd you with my cell #.

see ya

M&P40 · **Posted:** Fri Nov 02, 2007 9:15 pm

if anyone else is interested we are on for 8:30 in my garage. if you would like to join us just pm me and i will send you the address

robert

broncsrule · **Posted:** Sun Nov 04, 2007 11:23 am

Big thanks to Robert and Paul. The ride home was smooth as butter! All in all a very fun day. Thanks again guys!

Lift Party/ Help possibilities.......

Who is online