It is currently Sun Feb 08, 2026 3:04 pm

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
MzLiberty02
 Post subject: New Rims question
PostPosted: Tue Nov 27, 2007 10:17 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Aug 05, 2007 9:36 pm
Posts: 15
Location: Southern Wisconsin
I am thinking of purchasing a new set of wheels for my KJ. I bought 1 set and they wouldnt fit correctly ... they ht the brake rotor. So now I am gunshy.
The ones I am looking at now are ... 15 x 8 size 5 x 4.5 bolt pattern. I have a 2002 Liberty Sport. If anyone knows if these will fit I would greatly appreciate he info! I have little time left before they are sold (the seller is being patient with me) so if I can get an answer ASAP I will be indebted to you!!!

Thanx

_________________
"02" Black Jeep Liberty Sport
Stock ... For Now
Future add-ons ... lift, tires, wheels, lights anything that will make her BAD AND READY!!
1960 Jeep CJ5,restore project in the works!
Southern Wisconsin
Husband has a "96" Cherokee
http://www.myspace.com/mzliberty02
Top
 Profile  
 
Guest
 Post subject:
PostPosted: Tue Nov 27, 2007 10:18 pm 
get 16s.
Top
  
 
CD
 Post subject:
PostPosted: Tue Nov 27, 2007 10:25 pm 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
Get 16" rims or make sure the 15's have 3.5" back space, that should make sure you clear the calipers.

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ
Top
 Profile  
 
tjkj2002
 Post subject:
PostPosted: Wed Nov 28, 2007 1:35 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
You'd need steel 15" rims and since you have no lift a 15x8 rim with the BS(3.5"-4") needed will rub like crazy,stick to 16's and you'll be better off.
Top
 Profile  
 
WoodysKJ
 Post subject:
PostPosted: Wed Nov 28, 2007 9:24 am 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
Troy,

http://www.performanceproducts4trucks.com/productpage.aspx?pid=111187

These ProComps, are they any good? does ProComp make a decent wheel? Says load rating is 2200 lbs, is that too little? The BS is 4.5 and Offset is 0.

I am concerned about the TPMs i have and the steel wheels. I understand they fixed the issue of them not working with steel wheels by my model year, but...

07 by the way, and looking to get rid of the 17"ers i have and expand my rubber choices in the 16"ers.

I like the all black, Soft 8's are cool but the TPM issue.....

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks
Top
 Profile  
 
djformi
 Post subject:
PostPosted: Wed Nov 28, 2007 9:48 am 
Offline
LOST Member

Joined: Wed Oct 26, 2005 10:57 pm
Posts: 193
Location: Columbia, MD
What are some 15 inchers that have 3.5 backspace?

_________________
$$$$
03 Liberty - Borla
2000 Dak Quad Cab - 31 Mich ATs
Top
 Profile  
 
JHCRASH
 Post subject:
PostPosted: Wed Nov 28, 2007 10:38 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Sep 04, 2007 12:32 am
Posts: 362
Location: Tooele, Utah
WoodysKJ wrote:
Troy,

http://www.performanceproducts4trucks.com/productpage.aspx?pid=111187

These ProComps, are they any good? does ProComp make a decent wheel? Says load rating is 2200 lbs, is that too little? The BS is 4.5 and Offset is 0.

I am concerned about the TPMs i have and the steel wheels. I understand they fixed the issue of them not working with steel wheels by my model year, but...

07 by the way, and looking to get rid of the 17"ers i have and expand my rubber choices in the 16"ers.

I like the all black, Soft 8's are cool but the TPM issue.....



What TPM issue are you refering to,I inatalled them in my soft 8s just fine :?:

_________________
05' limited CRD Patriot Blue
RRO Rockfather
30/9.50/15 procomp mudders
rockkrawler wheels
EHM/SEGR almost, freeflow exhaust 5"hole
custom cross rails
SC ROCKSTAR (the first)
Life changes with kids,make sure it is for the best.
Top
 Profile  
 
WoodysKJ
 Post subject:
PostPosted: Wed Nov 28, 2007 12:31 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
When they were introduced in 05, i think, the original ones needed magnets to program them and they were also not able to work in steel rims. subsequent years they supposedly have addressed the issue with new ones that identify themselves to the wheel well mounted sensors and thus no magnet needed for programing. I have heard that this also addressed the steel rim issue. but the stealership is reluctant to advise.

Show me pics of your KJ please. Is that the one with the new bumper you made?

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks
Top
 Profile  
 
C co Crusader 2/127
 Post subject: Re: New Rims question
PostPosted: Wed Nov 28, 2007 2:23 pm 
Offline
LOST Member

Joined: Sat Aug 04, 2007 11:23 am
Posts: 377
Location: Kaukauna, Wisconsin
MzLiberty02 wrote:
I am thinking of purchasing a new set of wheels for my KJ. I bought 1 set and they wouldnt fit correctly ... they ht the brake rotor. So now I am gunshy.
The ones I am looking at now are ... 15 x 8 size 5 x 4.5 bolt pattern. I have a 2002 Liberty Sport. If anyone knows if these will fit I would greatly appreciate he info! I have little time left before they are sold (the seller is being patient with me) so if I can get an answer ASAP I will be indebted to you!!!

Thanx


im guessing that the rims you had in 15" were aluminum. In that case their never going to fit. their to thick. You shoudnt have a prblem with steel 15" rims because there a lot thinner. An crager makes some really good steelies

_________________
2003 Jeep LIberty Renegade
Rusty's Offroad 2.5in suspension lift w/ rear rancho shocks, Fastman TB, Beam's 4 point harness', custom D rings up front, Custom flowmaster exhaust, JKS Quick sway bar disco's
Hella 500's, General Grabber AT2's on stock rims with spidertrax
coming soon: Corbeau Moab seats, JBA 6"lift
Top
 Profile  
 
wildrussian
 Post subject:
PostPosted: Wed Nov 28, 2007 3:06 pm 
Offline
LOST Member

Joined: Mon Jul 02, 2007 10:34 pm
Posts: 437
Location: Rocky Top Tennessee
WoodysKJ wrote:
Troy,

http://www.performanceproducts4trucks.com/productpage.aspx?pid=111187

These ProComps, are they any good? does ProComp make a decent wheel? Says load rating is 2200 lbs, is that too little? The BS is 4.5 and Offset is 0.

I am concerned about the TPMs i have and the steel wheels. I understand they fixed the issue of them not working with steel wheels by my model year, but...

07 by the way, and looking to get rid of the 17"ers i have and expand my rubber choices in the 16"ers.

I like the all black, Soft 8's are cool but the TPM issue.....


I got ProComp wheels, they are similar to those only with silver rim. I love them. Just remember that those black wheels are mate and not shinny like cragars would be.

_________________
05 Liberty 4x4, Atlantic Blue
Extended Breathers
3/4 Mopar Skids
OME Lift, 245/75/16 General Grabbers AT2, ProComp Extreme Alloys 7189
Mopar Tow Hooks
Top
 Profile  
 
WoodysKJ
 Post subject:
PostPosted: Wed Nov 28, 2007 3:37 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
wildrussian wrote:
WoodysKJ wrote:
Troy,

http://www.performanceproducts4trucks.com/productpage.aspx?pid=111187

These ProComps, are they any good? does ProComp make a decent wheel? Says load rating is 2200 lbs, is that too little? The BS is 4.5 and Offset is 0.

I am concerned about the TPMs i have and the steel wheels. I understand they fixed the issue of them not working with steel wheels by my model year, but...

07 by the way, and looking to get rid of the 17"ers i have and expand my rubber choices in the 16"ers.

I like the all black, Soft 8's are cool but the TPM issue.....


I got ProComp wheels, they are similar to those only with silver rim. I love them. Just remember that those black wheels are mate and not shinny like cragars would be.


I know I love the matte finish but the price difference. I can get 2 or maybe 3 Soft 8's for the same price as a cast wheel. and if my tpms wor as i am hearing, then why not. a 50.00 bent rim is alot easier on the wallet than a 150.00 cracked alum. rim any day. you can drive on a bent one too. not fun but driveable.

I am just pissed that i didn't investigate the rims prior to buying my kj.

anyway some stock 17" rims will be for sale in the future.

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management