It is currently Tue Dec 02, 2025 11:37 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: CRD Lift results -- How High can you go
PostPosted: Mon Dec 17, 2007 2:03 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2520
Location: LOST in Wisconsin
I was following the discussion of JeepinAl's 4" lift and was wondering what kind of lifts and what amount of lift everyone was getting. It would be good for comparison purposes to have unlifted KJ's report as well.

How to measure:
Measure from the bottom of the flare at the edge to the center of the wheel. Measurement should be straight down. you can use a plumb bob or a nut on a string. I used a pencil at the wheel center as a reference then use a tape measure. Might want to empty all the tools and cargo out before you measure, and park on the flat. Report your results in the following format:

2005 CRD Sport, lift installed Oct 2006
Front Lift kit: Daystar 2" lift pucks and RRO .125 strut spacer,
Front Right: 19 7/8
Front Left: 19 7/8
Rear Lift kt: Daystar 2" puck and stock spring isolator
Rear Right: 20 1/4
Rear Left: 20 1/4
Issues: None so far

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 21, 2007 5:19 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2520
Location: LOST in Wisconsin
bump, Anyone with a Frankenlift or Rusty's care to post thier measurements?

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 21, 2007 6:26 pm 
Offline
LOST Member

Joined: Thu May 17, 2007 9:35 pm
Posts: 445
Location: Phoenix, Arizona
I went with the Franklin Lift, OME struts and springs, stayed with the stock upper A arms, and I got exactly 3" front and back (from before and after, using the same tires, etc.).

I am still waiting for it to settle some, but so far I am extremely pleased with the ride. I would do it again in a second...


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 21, 2007 7:46 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2520
Location: LOST in Wisconsin
Turbo Tim wrote:
I went with the Franklin Lift, OME struts and springs, stayed with the stock upper A arms, and I got exactly 3" front and back (from before and after, using the same tires, etc.).

I am still waiting for it to settle some, but so far I am extremely pleased with the ride. I would do it again in a second...


I'm considering the same, but would really like to know how much taller it is. Do you have time to provide measurements?

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com