al's arms

carbolight · **Posted:** Fri Aug 01, 2008 1:00 am

ga_repoman wrote:

today is the day got some time off work and droped off the liberty to try to align the front end
So 2.5" daystar and the 4.5 gen al's arm's on and we will see what happens.......

update :
It worked took about 3hrs but it worked
not more noise and the alignment looks good too feels alot better driving it too

I have an exact match; Daystar 2.5" spacer lift with Als A-arms. I'm hearing a clicking/clanking sound in the front when driving on a bumpy terrain and usually happens on turns. Will try to re-torque the sway bar ends and do some greasing and see if the sound goes away. But I will use any help as well.

rt_power · **Posted:** Sun Aug 03, 2008 9:01 am

im getting the exact same sound on the drivers side as carbolight im going to recheck all the bolts but i thought i got them all. the only posable spot could be the rear upper a arm in the case its a PITA to even get your hand in there never mind turning a wrench

carbolight · **Posted:** Sun Aug 03, 2008 10:56 am

rt_power wrote:

im getting the exact same sound on the drivers side as carbolight im going to recheck all the bolts but i thought i got them all. the only posable spot could be the rear upper a arm in the case its a PITA to even get your hand in there never mind turning a wrench

Got mine fixed. The A-arm body mounting bolts were not torqued correctly. Now runs with no noise.

al's arms

Who is online