fiberglass hoods

tommudd · **Posted:** Fri Sep 26, 2008 5:19 pm

Every so often the subject of hoods comes up, has anyone ever checked out Campbell Enterprises, 480-782-5337, campbellent.com
They are suppose to have stock width hoods along with narrowed hoods and grills for rock buggys and even a fender set ? tried calling but only got a message

If anyone is near Gilbert Az. maybe you could check them out to see what their stuff looks like ?? just a thought to some different parts

tommudd · **Posted:** Fri Sep 26, 2008 5:23 pm

NEVER MIND as soon as I posted this I got a call back from them, they only do narrowed hoods/ grills now and their Liberty flares do not fit a Liberty

Check out their website though and go to the WHATS NEW section at the bottom of the page their is one sick looking buggy with a Liberty body kit on it,

I WANT ONE!!!!

maybe someone with better computer skills can post it up???

JJsTJ · **Posted:** Fri Sep 26, 2008 5:27 pm

BR Tech would make them in clear or colored lexan if there was enough interest........which is doubtful given the $325-$425 price.
http://www.lostjeeps.com/forum/phpBB3/vie ... hood+lexan

(of course this will just turn into another how to paint lexan argument now...) :roll:

tommudd · **Posted:** Fri Sep 26, 2008 5:46 pm

JJsKJ wrote:

BR Tech would make them in clear or colored lexan if there was enough interest........which is doubtful given the $325-$425 price.
http://www.lostjeeps.com/forum/phpBB3/vie ... hood+lexan

(of course this will just turn into another how to paint lexan argument now...) :roll:

Yes we all got a very good?? education on how to paint lexan on that one

never mind! :wink:

Blue KJ in PA · **Posted:** Fri Sep 26, 2008 6:36 pm

You just have to prep it right...with peanut butter!

Drassis · **Joined:** Tue Sep 23, 2008 7:31 pm **Posts:** 182

JJsKJ wrote:

BR Tech would make them in clear or colored lexan if there was enough interest........which is doubtful given the $325-$425 price.
http://www.lostjeeps.com/forum/phpBB3/vie ... hood+lexan

(of course this will just turn into another how to paint lexan argument now...) :roll:

I would buy one if they had vents or a scoop 425 isnt that bad a price

Dje Ryu · **Posted:** Fri Sep 26, 2008 11:20 pm

Drassis wrote:

JJsKJ wrote:

BR Tech would make them in clear or colored lexan if there was enough interest........which is doubtful given the $325-$425 price.
http://www.lostjeeps.com/forum/phpBB3/vie ... hood+lexan

(of course this will just turn into another how to paint lexan argument now...) :roll:

I would buy one if they had vents or a scoop 425 isnt that bad a price

Whoa! A Wyo company! Might be worth a drive down there if I can finagle a free scoop hood out of it.

mrkake · **Posted:** Sat Sep 27, 2008 12:29 am

My brother's buddy has a Liberty kit on his rock buggy. It looks alot like the one in the thread mentioned above. Unfortunately, he thinks its a joke. He thinks they are just grocery carts like so many others. :roll:

riptricket · **Posted:** Sat Sep 27, 2008 11:54 am

if it had a hood scoop i would also get it... maybe for not that price, i'd not spend over $300 and it would be cool in a carbon fiber silver to match my Wendy's color (That's the KJ BTW)!!

raceinfan · **Posted:** Sat Sep 27, 2008 4:17 pm

there is this one also

http://www.e-bodyparts.com/Car-Hoods/Pr ... H-98DT.htm

Fulltimer · **Posted:** Sat Sep 27, 2008 7:18 pm

raceinfan wrote:

there is this one also

http://www.e-bodyparts.com/Car-Hoods/Pr ... H-98DT.htm

It says they are for 1998 to 2007 Libirties. I want one of the 98's! :lol:

Terry

2006 KJ · **Posted:** Sat Sep 27, 2008 7:21 pm

those are real cool! i'd have to have one if i didnt already have the flat renny hood.

Dje Ryu · **Posted:** Sat Sep 27, 2008 9:00 pm

Has anyone noticed all the new stuff at Al's?: http://jeepinbyal.com/prod-Suncoast_Hoo ... s-594.aspx

jeremesh · **Posted:** Sat Sep 27, 2008 9:33 pm

Dje Ryu wrote:

Has anyone noticed all the new stuff at Al's?: http://jeepinbyal.com/prod-Suncoast_Hoo ... s-594.aspx

I dont like that hood too much. I was thinking of getting this type of scoop to put on the jeep... anybody else got this on their liberty yet?

PCT 1981 · **Posted:** Sun Sep 28, 2008 11:30 am

Here is a fiberglass hood -
http://www.usbodysource.com/

raceinfan · **Posted:** Sun Sep 28, 2008 1:02 pm

PCT 1981 wrote:

Here is a fiberglass hood -
http://www.usbodysource.com/

thats the same one I posted :wink:

dieselenthusiast · **Posted:** Sun Sep 28, 2008 4:08 pm

I might consider buying an aftermarket hood if I knew it would serve a performance purpose such as cooling the engine bay and acting as a ram air that I could duct into my factory air box.

Sport · **Posted:** Sun Sep 28, 2008 4:31 pm

it would definitely weigh less.

tjkj2002 · **Posted:** Sun Sep 28, 2008 4:34 pm

I'd like a compistite or fiberglass hood that has no ram air,hood scoops,or cowl induction,just want one that looks like the OEM hood for one simple reason.....................

No more stinkin hail dents :twisted:

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Drassis · **Joined:** Tue Sep 23, 2008 7:31 pm **Posts:** 182

dieselenthusiast wrote:

I might consider buying an aftermarket hood if I knew it would serve a performance purpose such as cooling the engine bay and acting as a ram air that I could duct into my factory air box.

Im under the same though process, and i bet it could be made to work for a cold air intake..

Of course you can always have a fiberglass scoop made than cut out your factory hood and do a bolt on might be alot cheaper, or if you want the lighter weight go with the new hood

fiberglass hoods

Who is online