Provent

bigugly · **Posted:** Sun Sep 28, 2008 7:44 pm

Guys,

I have a provent 200 installed and I placed it on the passenger side near the fire wall like some others have. I have it zip tied to one of the AC lines and I am not sure it is the best way to secure it.

I have seen pictures posted of the location of the provent (same place as mine) but none of the exact mounting/securing that was done to keep it in place.

Those with the provent in the same place as mine, how did you secure it in place?

dgeist · **Posted:** Sun Sep 28, 2008 10:14 pm

bigugly wrote:

Guys,

I have a provent 200 installed and I placed it on the passenger side near the fire wall like some others have. I have it zip tied to one of the AC lines and I am not sure it is the best way to secure it.

I have seen pictures posted of the location of the provent (same place as mine) but none of the exact mounting/securing that was done to keep it in place.

Those with the provent in the same place as mine, how did you secure it in place?

Zip-tied through the upright of the vacuum stack in front of it.

Bill.Barg · **Posted:** Mon Sep 29, 2008 11:10 am

I left mine loose

ATXKJ · **Posted:** Mon Sep 29, 2008 11:17 am

Loose - there's no room for it to fall over.

willie · **Posted:** Mon Sep 29, 2008 12:56 pm

Same here, loose.

Zonie · **Posted:** Mon Sep 29, 2008 1:23 pm

Mine's been loose for 30,000 miles. No problem.

blake1827 · **Posted:** Mon Sep 29, 2008 3:12 pm

yeah mines loose too the hoses are stiff enough to keep in in one spot. (I'm using heater hose and not dishwasher though...)

bigugly · **Posted:** Mon Sep 29, 2008 8:15 pm

thanks guys for the info.

will let the provent hang loose from here on out.

mrkake · **Posted:** Tue Sep 30, 2008 2:32 am

Just check your hoses for signs of wear. Mine has been loose for 50k miles and at one point I did notice some scuffing on one of the hoses so I just put some loom on it.

Provent

Who is online