I apologize in advance because I'm sure this information is somewhere, but I can't find it.

Soo.....Which fumoto is the correct one for our CRDs? I see the F108 is mentioned in most of the fumoto posts along with an adaptor. The Lubrication Specialists site lists the F102 and no adapter and I can't find an adapter for the F108.

Has anyone installed the F102?

Also, the F102 appears to come with a washer on it. Can anyone confirm this? Should it be installed with their washer, the OEM washer, either, or neither?

http://www.lubricationspecialist.com/fr ... roductid=5

Thanks again...

_________________
2006 CRD Limited
SEGR Mod
Saikou Michi Condenser -- Deleted
Samco Hose Kit
Fumoto 102
Etecno1 GX3123 Steel 7V Glow Plugs
GDE FT Eco and Hot Tunes
JBA 4.5 UCAs
OME Lift

I did, work perfect. Should be installed with their washer.

_________________
2006 Black Jeep Liberty CRD Limited
K&N, Samco Hoses, Michelin 245/70-16 LTX A/T2, Fumoto F-102, V-Force Muffler, Mopar, Hitch, Trailer Wiring, Skid Plates, Slush Mats, Rear Shelf, Predator Stage 1, Transgo, ORM & CodeReader, Facet 40109 Pump
"IT'S A DIESEL THING, YOU WOULDN'T UNDERSTAND"
Certified Services Auto & Truck Repair

Thanks. I ordered the 102

_________________
2006 CRD Limited
SEGR Mod
Saikou Michi Condenser -- Deleted
Samco Hose Kit
Fumoto 102
Etecno1 GX3123 Steel 7V Glow Plugs
GDE FT Eco and Hot Tunes
JBA 4.5 UCAs
OME Lift

I had the unit with the adapter for a while, then Lube-spec started carrying the model with no adapter necessary. I gave the old one to someone here... can't remember now who it was, but both worked great, just more ground clearance with the latter.

Dan

_________________

2005 Silver CRD Limited
245/75R16 GoodYear Duratracs
Fumoto drain | ProVent CCV Filter
Stanadyne FM100 filter | Cummins fuel pump
GDE Eco | SEGR | BoulderBars | FrankenLift | Frankenskids

dan gave his to me... then i altered it and made it much shorter, like almost 3/4" shorter and it is working wonderfully

_________________
Trevor

'05 Limited CRD Inferno Red Pearl Coat
Home made provent installed @ 35443, SEGR installed @ 35466, Fumoto valve @ 37500, trans and transfer case skid, In tank pump installed @ 43500, Suncoast TC & Transgo Shift Kit @ 44730, EGT, Boost, Trans temp gauges, Samco hoses, Rebuilt Trans w/ HD454RFE kit @ 56K, Inmotion Stage 2 @ 56K

Defiantly 102, i have the one with the nipple (f102n i think) and it fits great with the mopar skid plates.

_________________
06 CRD Limited. IMII, GDE TCM, Carter transfer pump, Upgraded oem primary, 2 micron secondary, 3 inch mandrel straight pipe.
Transgo shift kit, EHM, fcv butterfly removed, egr plated off. 19 3/8 solid flex fan, no electric fan, 10k lb aux trans cooler.
Frankenlift II, Mopar skids, allj's rails, 235/85 km2 on stock rims