It is currently Mon Jun 01, 2020 12:14 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 163 posts ]  Go to page 1, 2, 3, 4, 5 ... 9  Next
Author Message
 Post subject: LTT True Cold Air Intake for KJ's
PostPosted: Sat Jan 24, 2009 5:39 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1121
Location: DFW, TX
I have the first couple of the intake scoops and airbox adapters ready to ship out. I know these work on 05-07 models. Jeepjeepster is checking fitment on the 02-04 models now. If this version doesn't fit the 02-04, I will make another version for them as well. I will posts updates here as they come. I do not know if these will fit the KK, but if someone wants to try, or give me the info needed to make a KK version, I will be happy to make one for them too. The cost is a tad higher than I initially had quoted. The reason being, I forgot to include the cost of the support material for the 3D printer that I had to buy too. Remember, I am not making money on these. I am just sharing my design with all of you that had an interest. These are built on a 3D printer (rapid prototyping machine). The material is ABS plastic.

Grill intake scoop: $45
Airbox adapter for 3" hose/tubing: $50
Shipping one or both of the pieces listed above to anywhere in the continental US via USPS 3 Day Priority Mail: $12.95
. I checked shipping prices other than that,
. and shipping parcel post post required me
. to buy my own boxes. Added all up, it was
. only a couple dollars less, and I figure
. most would rather have the faster shipping.
If you want me to ship outside of US, I can quote that to you individually.

If you want one of these, just PM me. I will take payments via Paypal. I have 2 of the scoops and 2 of the airbox adapters ready now. I can only use the machine after hours and on weekends, so I will be taking orders on a first come, first serve basis. Please be patient on these initial orders, since it seems that a lot of you are interested. I'll create a running/waiting list for the initial orders and fill them ASAP. You won't need to pay until I have yours built and ready to ship. Then once I have yours built, you pay, and then I'll ship to you.

The hose to run between the scoop and the airbox is just 3" aluminum dryer vent hose that you can pick up at any Lowe's or Home Depot. You can use hose clamps if you want, but they really aren't needed. It fits pretty snug without them. You can also pick up a couple of plastic push-in rivets at the hardware store too for mounting.

I used both pieces on mine. However, dieselenthusiast is going to just use the intake scoop and then cut a 3" hole in the bottom/side of the airbox with a hole saw to feed his airbox. He has promised pics of that setup once he has it done.

If you have any questions about these, feel free to ask.

Here are some pictures

Grill Intake Scoop
Image

Airbox adapter for 3" hose/tubing
Image

Airbox Adapter installed
Image
Image

Scoop Installed
Image
Image
Image

Scoop Installed behind grill
Image

05-07 Grill without scoop
Image

I just cut the rubber barrier piece horizontally just above the second hole. Then I folded it back behind in case I ever need to go back stock.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Last edited by long_tall_texan on Thu Jul 22, 2010 12:57 pm, edited 3 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 1:27 pm 
Offline
LOST Newbie
User avatar

Joined: Mon Nov 17, 2008 1:00 am
Posts: 34
Location: Jonesboro, AR
Are you selling these?

_________________
[CENTER][SIZE="3"]Weston[/SIZE]

Current KJ's:
[COLOR="Black"]2005 Soon to be Lifted Limited - My New Project[/COLOR]
[COLOR="Navy"]2007 Stock Latitude Edition - Wife's[/COLOR]

Previous KJ:
[SIZE="2"][COLOR="Navy"]2005 Lifted RENEGADE - *Totaled 1/30/12*[/COLOR][/SIZE]
[url="http://www.jeepkj.com/forum/showpost.php?p=543602&postcount=5"]Mod List[/url] [url="http://www.jeepkj.com/forum/album.php?albumid=28"]Photos[/url]


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 2:52 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1121
Location: DFW, TX
Yes. I am making them and selling them for material cost only. I made one for myself and showed it in another thread and several had interest and wanted one. So now I am making them for anyone here that is interested.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 3:12 pm 
Offline
LOST Newbie
User avatar

Joined: Mon Nov 17, 2008 1:00 am
Posts: 34
Location: Jonesboro, AR
Oh i see well how much you charging?

_________________
[CENTER][SIZE="3"]Weston[/SIZE]

Current KJ's:
[COLOR="Black"]2005 Soon to be Lifted Limited - My New Project[/COLOR]
[COLOR="Navy"]2007 Stock Latitude Edition - Wife's[/COLOR]

Previous KJ:
[SIZE="2"][COLOR="Navy"]2005 Lifted RENEGADE - *Totaled 1/30/12*[/COLOR][/SIZE]
[url="http://www.jeepkj.com/forum/showpost.php?p=543602&postcount=5"]Mod List[/url] [url="http://www.jeepkj.com/forum/album.php?albumid=28"]Photos[/url]


Top
 Profile  
 
 Post subject: Re: LTT Ram-Air Intake for KJ's
PostPosted: Sun Jan 25, 2009 3:19 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1121
Location: DFW, TX
From the original post above...

long_tall_texan wrote:
Grill intake scoop: $45
Airbox adapter for 3" hose/tubing: $50
Shipping one or both of the pieces listed above to anywhere in the continental US via USPS 3 Day Priority Mail: $10
. I checked shipping prices other than that,
. and shipping parcel post post required me
. to buy my own boxes. Added all up, it was
. only a couple dollars less, and I figure
. most would rather have the faster shipping.
If you want me to ship outside of US, I can quote that to you individually.

If you want one of these, just PM me. I will take payments via Paypal.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 4:24 pm 
Offline
LOST Newbie
User avatar

Joined: Mon Nov 17, 2008 1:00 am
Posts: 34
Location: Jonesboro, AR
where did you get the scoop and the air box peice from?

_________________
[CENTER][SIZE="3"]Weston[/SIZE]

Current KJ's:
[COLOR="Black"]2005 Soon to be Lifted Limited - My New Project[/COLOR]
[COLOR="Navy"]2007 Stock Latitude Edition - Wife's[/COLOR]

Previous KJ:
[SIZE="2"][COLOR="Navy"]2005 Lifted RENEGADE - *Totaled 1/30/12*[/COLOR][/SIZE]
[url="http://www.jeepkj.com/forum/showpost.php?p=543602&postcount=5"]Mod List[/url] [url="http://www.jeepkj.com/forum/album.php?albumid=28"]Photos[/url]


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 5:09 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7947
Location: Big Bear & Lancaster, Ca.
ummmmhey there blue kj....I hate to be a smarta$$ but try re-reading his whole 1st post. It has Everything you need to know in it.

His post states Cost, what he made and how he made it.

I will be ordering the airbox adapter soon. I believe the scoop I have should work Ok, just need to verify diameter.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 5:40 pm 
Offline
LOST Addict

Joined: Mon Oct 17, 2005 9:27 am
Posts: 2248
Location: Woodward Ave
I'm on travel right now but when I get home Friday I'll order a set and see how to make this fit in the early model KJ's.

_________________
02 Liberty Limited
Silver Outside & Taupe Inside
Heated Seats, Sunroof & Infinity speakers
USA Spec I-Pod adaptor, Mopar Sub, Garmin GPS
Tow Package, Select-Trac
Rock Rails, Tow Hooks


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 6:25 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1121
Location: DFW, TX
sleeve84028 wrote:
I'm on travel right now but when I get home Friday I'll order a set and see how to make this fit in the early model KJ's.


Jeepjeepster already has a set in hand and is test fitting this week. Will post updates when I have 'em.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 25, 2009 7:06 pm 
Offline
LOST Member
User avatar

Joined: Sun Aug 24, 2008 8:33 pm
Posts: 225
Location: Sierra Vista, AZ
Wow you are the man. I was following the other post, hoping you would go through with this. I definitely want the grill intake scoop if jeepjeepster can make his fit. I'll by tracking this post intently. Once again, you are the man for taking the time to do this and sell it for cost.

_________________
02' KJ Limited/Frankenlift I HD Coils
245/75 Big Foot A/T's on Soft 8's
EBC Greenstuffs 7000
K&N Air Filter
Full set Mopar skids
Sirius Sat Radio
Cheapa$$ Subwoofer
Custom pinstripes:)


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 26, 2009 11:40 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8057
Location: Kentuckeeee
Whew, no pressure! :lol:

Ill get it done as quick as possible! :D

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 26, 2009 11:58 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1121
Location: DFW, TX
Hey. Whenever you get to it. School comes first.

And I am not rushing you. I already have one installed on mine! :lol:

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 27, 2009 12:38 am 
Offline
LOST Member
User avatar

Joined: Sun Aug 24, 2008 8:33 pm
Posts: 225
Location: Sierra Vista, AZ
Jeepjeepster wrote:
Whew, no pressure! :lol:

Ill get it done as quick as possible! :D


Hey no problem man, we all know people have lives outside of LOST. Well...most of us.:D

_________________
02' KJ Limited/Frankenlift I HD Coils
245/75 Big Foot A/T's on Soft 8's
EBC Greenstuffs 7000
K&N Air Filter
Full set Mopar skids
Sirius Sat Radio
Cheapa$$ Subwoofer
Custom pinstripes:)


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 27, 2009 2:50 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Nov 04, 2007 3:02 am
Posts: 2175
Location: Michigan City, IN
I'm interested too but first waant to see how much work it will be to modify it to fit jeepjeepsters. Thanks Long_Tall_Texan for sharing your design with the rest of us!

_________________
Blood Clot Red 03 Punisher Edition
245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar, Mudd's Garage Rear Bumper
custom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501


Top
 Profile  
 
 Post subject: Very Happy
PostPosted: Wed Jan 28, 2009 6:54 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5831
Location: 7,000 feet, Zuni Mountains, New Mexico
Got mine today.................... 8) I'm very impressed. :shock: Thank You Texan for your excellent idea, excellent product, and excellent customer service............... :wink:

Image
Image
Image

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 31, 2009 11:12 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8057
Location: Kentuckeeee
Got a chance to try it out on thursday. The back of the funnel hits on the side of the head light and the radiator support. If the back of it was trimmed off some it may slide on back in. The rubber shield would probably need to be cut out so it would fit past the condenser lines too. I tried to pull mine back and it was hitting the funnel but that stuff is kinda thick. The lower tab would also need to be cut off.

Image

Image

Definitely doesnt fit as nice as the 05+.. :(

Got an ice storm this week and my power has been off all week.. Saying it may be on by monday.. :?

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 31, 2009 11:41 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1121
Location: DFW, TX
Tom and friends are going to take a look at how to make one that would fit today at the Ohio "training". Hopefully they can mock-up something that will work on the early models. Then I will model it in CAD and do a test print. Looks like it is going to have to have quite a few changes. I'll keep at it though...

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 31, 2009 12:58 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Dec 24, 2008 12:27 pm
Posts: 849
Location: Oklahoma
Texan count me down for one of these when I get my school money...that is just too cool I got an 05 so there shouldn't be a problem right? and if I understood it $105 for a complete setup?

_________________
Past: 95 Dodge Neon 2.0L Stage 4 Turbo (Street Tuner) *Wrecked/Sold*
Present: 05 Jeep Liberty (KJ) 2WD 3.7L, LTT CAI, Weight Reduction, SS Ultra Lights, and many more mods

If I don't stir the pot then no body will and the world would be boring, watch this guy for extreme sarcasm though :D


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 31, 2009 1:01 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1121
Location: DFW, TX
Yes. That is correct. $105 for both pieces shipped anywhere in the Cont. US. Just PM me when you get ready to buy and I will give you my PayPal address.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 31, 2009 1:03 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Dec 24, 2008 12:27 pm
Posts: 849
Location: Oklahoma
Ok I will definitely do that.. I get my money on feb 10th.. well at least $1500 of it...the rest comes later.

_________________
Past: 95 Dodge Neon 2.0L Stage 4 Turbo (Street Tuner) *Wrecked/Sold*
Present: 05 Jeep Liberty (KJ) 2WD 3.7L, LTT CAI, Weight Reduction, SS Ultra Lights, and many more mods

If I don't stir the pot then no body will and the world would be boring, watch this guy for extreme sarcasm though :D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 163 posts ]  Go to page 1, 2, 3, 4, 5 ... 9  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com