KK steel bumper (finished)

NYKreepytats · **Posted:** Mon Jan 26, 2009 7:01 pm

I want one........ :twisted:

Diggerfreek · **Posted:** Mon Jan 26, 2009 8:40 pm

SilverKK09 wrote:

HE TOLD ME IN A PM that was deleted during site maintenance, that he will sell these bumpers for 149.99 shipped to your door...
This is the last good copy of the price quote:

Re: Price for bumper
From:Boblemoche
Hi silverKK09, thanks for your inquiry:
The bumper will be available to all members of the LOST community and will start taking orders today. The price for each bumper is 149.99CN
the price includes:
overnight shipping,
installation hardware,
auxiliary lights*
Warn Winch

If you like my price send the funds through paypal, if you dont like the price, tell me whats fair and just send it through paypal.

Have a good one Eh?!
Boblemoche

*The price is for a pair of lights, either hella or piaa. Not sure what youll get but its something between the two

So there you have it!
start a list now!
=)

its a good think your in TX...other wise you might have had a can of Canadian Whoop stupid opened up on you if you lived any closer :shock:

SilverKK09 · **Posted:** Mon Jan 26, 2009 8:54 pm

Diggerfreek wrote:

SilverKK09 wrote:

HE TOLD ME IN A PM that was deleted during site maintenance, that he will sell these bumpers for 149.99 shipped to your door...
This is the last good copy of the price quote:

Re: Price for bumper
From:Boblemoche
Hi silverKK09, thanks for your inquiry:
The bumper will be available to all members of the LOST community and will start taking orders today. The price for each bumper is 149.99CN
the price includes:
overnight shipping,
installation hardware,
auxiliary lights*
Warn Winch

If you like my price send the funds through paypal, if you dont like the price, tell me whats fair and just send it through paypal.

Have a good one Eh?!
Boblemoche

*The price is for a pair of lights, either hella or piaa. Not sure what youll get but its something between the two

So there you have it!
start a list now!
=)

its a good think your in TX...other wise you might have had a can of Canadian Whoop stupid opened up on you if you lived any closer :shock:

After re-reading my post I now know that I had a brain fart or something... I did not meant to hurt anyone... just tried to make a stoopid joke
sorreeeeeee

tommudd · **Posted:** Mon Jan 26, 2009 9:09 pm

At least Boblemoche doesn't live in Utah :roll:

Diggerfreek · **Posted:** Mon Jan 26, 2009 9:33 pm

tommudd wrote:

At least Boblemoche doesn't live in Utah :roll:

I think a horse just died :lol:

NYKreepytats · **Posted:** Mon Jan 26, 2009 10:25 pm

Boblemoche · **Posted:** Tue Jan 27, 2009 8:30 pm

yjtj wrote:

ok you had me thinking. i know some people like the look of a fancier bumper, but i have always like the utilitarian look. i was thinking if you have to cut the flares, why rebuild the bumper up to them. this is my idea for a simple bumper thats easy to make and i like the look. just an idea.

Its just my personal tastes, I dont like this style of bumper and you would need to cut a lot of the front cross member to make it look good

Quote:

HE TOLD ME IN A PM that was deleted during site maintenance, that he will sell these bumpers for 149.99 shipped to your door...
This is the last good copy of the price quote:

Re: Price for bumper
From:Boblemoche
Hi silverKK09, thanks for your inquiry:
The bumper will be available to all members of the LOST community and will start taking orders today. The price for each bumper is 149.99CN
the price includes:
overnight shipping,
installation hardware,
auxiliary lights*
Warn Winch

If you like my price send the funds through paypal, if you dont like the price, tell me whats fair and just send it through paypal.

Have a good one Eh?!
Boblemoche

*The price is for a pair of lights, either hella or piaa. Not sure what youll get but its something between the two
** To be elegible to this price you need to do a few darn good **** jobs
*** Mens may not apply

look closer, you forgot to read the fine prints at the end :lol:

Quote:

Ok, whatever shipping would be.... whatever. But what about the price you might charge, if you were to make such bumpers?

well its hard to tell since its not finished yet but I would say something in the range of 600$ to 900$ depending mostly on how much it cost to have some parts cnc cut and the paint job If I sell them painted or not.

Quote:

After re-reading my post I now know that I had a brain fart or something... I did not meant to hurt anyone... just tried to make a stoopid joke
sorreeeeeee

lol no worries. you would have to write stuff that would get you banned from this forum long before you can actually hurt my feelings :shock:

Diggerfreek · **Posted:** Tue Jan 27, 2009 9:36 pm

So where are you bolting the bumper up to? Should I assume you drilled new holes?

MtnLuvr · **Posted:** Tue Jan 27, 2009 9:37 pm

Yeah, it would be nice to see a photo or two of how this is attached to the KK.

Thanks for being a trailblazer Boblemoche.

yjtj · **Posted:** Tue Jan 27, 2009 9:51 pm

actually that pic is great to see whats there. i didnt realize it was such a long cross member. i have only had the liberty since late november and the drivway has had snow in it since before then, so i havent really been motivated to get under there and look.

Boblemoche · **Posted:** Tue Jan 27, 2009 10:15 pm

Quote:

So where are you bolting the bumper up to? Should I assume you drilled new holes?

it bolts where the tow hooks are so bye bye factory tow hooks. I use the 2 holes on the frame rail then if you look behind the tow hooks holes there is an extra hex hole that I use also and there will be a 4th hole drilled behind the third one so 4 holes per side will hold an angle iron 3/8 thick that stick uout of the front crossmember approx 6''. the bumper will be welded on them

Quote:

Yeah, it would be nice to see a photo or two of how this is attached to the KK.

will post them on the next series of pics in a few weeks

Quote:

actually that pic is great to see whats there. i didnt realize it was such a long cross member. i have only had the liberty since late november and the drivway has had snow in it since before then, so i havent really been motivated to get under there and look.

I know what you mean. I barely have enough motivation to get out and take bumper measurments let alone crawling under there

2006 KJ · **Posted:** Tue Jan 27, 2009 10:25 pm

that bumper looks outstanding.. it will really set yours apart.

jsc7002 · **Posted:** Thu Jan 29, 2009 1:30 pm

wheres the finished product? Im sure you have it all welded up, painted and have that winch all mounted, your holding out on us, arent you?? :lol:

Boblemoche · **Posted:** Fri Jan 30, 2009 12:27 am

jsc7002 wrote:

wheres the finished product? Im sure you have it all welded up, painted and have that winch all mounted, your holding out on us, arent you?? :lol:

I wish

Diggerfreek · **Posted:** Fri Jan 30, 2009 12:30 am

oh come on... you will stay warm while welding it :twisted:

MtnLuvr · **Posted:** Sat Jan 31, 2009 9:33 pm

Boblemoche, I hope you'll be able to provide another Sunday update, with photos, of your great looking custom winch-bumper work....

You're inspiring the KK owners out there that wish we could buy a winch-bumper somewhere or had the resources to build one....

Boblemoche · **Posted:** Sat Jan 31, 2009 9:37 pm

I may post more pics next sunday (not tomorrow) right now theres not much ''visible'' improvments on it from last week. sry :wink:

KKommando · **Posted:** Wed Feb 04, 2009 12:13 am

since you made the metal one can i have the cardboard one?

Boblemoche · **Posted:** Wed Feb 04, 2009 1:05 am

KKommando wrote:

since you made the metal one can i have the cardboard one?

sure

Ill send it folded as a post card :lol:

just dont try to fix a winch on it :shock:

jsc7002 · **Posted:** Fri Feb 06, 2009 1:23 am

today is Sunday, right?? wheres the pics?? :lol:

KK steel bumper (finished)

Who is online