HALO kits now available for KK's

nightdrv · **Posted:** Sat Mar 21, 2009 10:05 am

Just thought I would show this to you guys:

Jeep Liberty 8000K ORACLE Brand Halo Kit

zoso7374 · **Posted:** Sat Mar 21, 2009 10:26 am

are they 100% street legal? How is the light output compared to HID's?

hrogi · **Posted:** Sat Mar 21, 2009 11:28 am

I would not be the first one to buy this.

Ask for proof before purchase..

They tryed a projuct for the MX-5 and it came out bad and over priced.

Mike08Liberty · **Posted:** Sat Mar 21, 2009 11:41 am

zoso7374 wrote:

are they 100% street legal? How is the light output compared to HID's?

They are only for running lights. They aren't supposed to be used just as headlights. It's modeled after BMW headlights.

The only downside is that you will have to open your headlights to install these. If you pay attention to the directions it's not that hard to do.

hrogi wrote:

I would not be the first one to buy this.

Ask for proof before purchase..

They tryed a projuct for the MX-5 and it came out bad and over priced.

If you look at the pics the are installed on a set of Liberty headlights. It's not computer generated. Look closely and you can see they are on real lights.

Also if you look over their feedback there are some Liberty kits sold.

The next $200 I get to spend I'm going to buy the kit.

SilverKK09 · **Posted:** Sat Mar 21, 2009 12:58 pm

I posted this a looooong time ago... Mr nick was going to check if the headlight cover could be snapped out for the install of the halos.
Back when I had my charger RT I bought a set from these guys... its a very good product but the install was a pain in the buttocks... you had to bake the headlight to crack it open, install halos, then bake then put back the headlights... it was a 2 day install....
Some one in here was going to double check if the headlights were easy to disassemble... im waiting for that answer :roll:

if so, Im so into this kit!

nightdrv · **Posted:** Sun Mar 22, 2009 12:01 am

I would take a set in UltraViolet, at 4300K.

I really hope to do this over the summer. Lots of other things to use money for, but I will do my best to pick these up.

wingnuts · **Posted:** Wed Apr 01, 2009 8:50 pm

I so want to do this, but not real crazy about baking, anyone find out about this yet? if it is just clipped I bet they are really tight to keep the moisutre out,

I'd love to put blue ones in on my KK

Mr Nick · **Posted:** Wed Apr 01, 2009 10:38 pm

wingnuts wrote:

I so want to do this, but not real crazy about baking, anyone find out about this yet? if it is just clipped I bet they are really tight to keep the moisutre out,

I'd love to put blue ones in on my KK

I think a few people are waiting for me to pull the lights again and find out, I'm the one that suggested they might be clipped in the first place and not baked.

...However, I'm very busy working on my "priority car" which is my 1969 Cutlass. So, Jeep projects are on hold for a while, sorry guys! Not hard to do though, just pull the grill and remove 3 (I think) bolts and the whole headlight housing comes out.

JeepinJarhead03 · **Posted:** Wed Apr 01, 2009 11:16 pm

I have more interest in putting them on my offroad lights but I don't how how they'ed react to the heat of the offroad lights not that i use them very often

anyone got any comment on how theyed deal with the temps of the offroad lights? I don't have a clue what these deals are made of

Diggerfreek · **Posted:** Thu Apr 02, 2009 12:10 am

Ok, I fixed your 14 mile long link

And now we take you back to the show already in progress :lol:

nightdrv · **Posted:** Tue Apr 07, 2009 11:15 pm

Diggerfreek wrote:

Ok, I fixed your 14 mile long link

And now we take you back to the show already in progress :lol:

Thankyou. I'm just not tuned in enough for this channel.

Diggerfreek · **Posted:** Wed Apr 08, 2009 12:51 am

nightdrv wrote:

Diggerfreek wrote:

Ok, I fixed your 14 mile long link

And now we take you back to the show already in progress :lol:

Thankyou. I'm just not tuned in enough for this channel.

no problem. I'm usually out in outer space when I'm on here :twisted:

JeepinJarhead03 · **Posted:** Wed Apr 08, 2009 12:52 am

someone figure out a DIY to make something similar for my offroad lights

wingnuts · **Posted:** Mon Apr 20, 2009 8:25 pm

/quote]
...However, I'm very busy working on my "priority car" which is my 1969 Cutlass. So, Jeep projects are on hold for a while, sorry guys! Not hard to do though, just pull the grill and remove 3 (I think) bolts and the whole headlight housing comes out.[/quote]

Have you taken a break from the cutlass to look at this for us yet, I know you want to know and so do the rest of us.

I just read your post on the KC lights and light bar and remembered this part and just wanted to check up on it since its been 2 weeks or so since last update

wingnuts · **Posted:** Sun Apr 26, 2009 3:49 pm

OK I got sick of waiting to see if someone else would look into the headlight housing being sealed with glue or not.

here is my verdict. They are clipped together but still glued, I just took one out and tried to pull it apart, lifted the clip completely off the tab and one side and no movement, taking a really close look at it still looks like a glue of some sort sealing the assembly, which makes alot of sense because how else would you keep moisture out.

So needless to say, looks like they need to bake to open them up, no go on it just being clipped together, sorry to break the news

Diggerfreek · **Posted:** Sun Apr 26, 2009 3:52 pm

well thats good to know.... any one going to do the halo thing?

chava_olllllllo · **Posted:** Thu Apr 30, 2009 8:44 pm

Alright so this is my first post and new to this forum but I have been viewing the posts posted on this forum since Jan. I am actually planning on installing these halo lights. Call me an idiot but I got a hold of some spare headlights to test theses halo lights out. Better safe than sorry. Will be placing these orders within this next month and hopefully have them installed by the end of may.

Diggerfreek · **Posted:** Thu Apr 30, 2009 9:28 pm

chava_olllllllo wrote:

Alright so this is my first post and new to this forum but I have been viewing the posts posted on this forum since Jan. I am actually planning on installing these halo lights. Call me an idiot but I got a hold of some spare headlights to test theses halo lights out. Better safe than sorry. Will be placing these orders within this next month and hopefully have them installed by the end of may.

Nice, can't wait to see the out come

chava_olllllllo · **Posted:** Fri Jun 12, 2009 3:53 pm

Ordered my halo light 6000K a couple days ago and received them today. Will install when my HIDs arrive.

Plan on painting the housing black too. Will post a write up and picture when project completed.

hrogi · **Posted:** Fri Jun 12, 2009 4:52 pm

please take lots of photos....
Those help the most...

HALO kits now available for KK's

Who is online