Dealer had to replace my tranny shifter yesterday. To do that, they removed the entire center console assembly. Well, they didn't put it back in nice and snug, so now there is a gap between the console and the carpet. I tried pushing down on the console figuring it might snap into place but it didn't. Do these consoles mount with push-in pins, or are there screws in there?? I know it's nitpicky...but I want my console to fit into place exactly like it was when I bought it.

_________________

2005 Stone White KJ Limited CRD 4x4
Off-Road Pkg
Trac-Lok
Emu 790s/948s
Skyjacker H7088s rear/Bilsteins front
15x7 Black Rock Lobos/31x10.50 Firestones
GDE HOT Tune + TCM Tune
Euro TC
CB radio
Thrush Turbo muffler
AEM DryFlow filter

There are screws in the bottom of the armrest compartment, and under the shifter boot (manual) or the platic bezel around the auto shifter, and under the 4WD shifter boot + in the bottom of the cup holders. Once you take all of those out, just pull up from rear first and if you have power windows pop out switch housing's and undo wireing.[img][img]http://img11.imageshack.us/img11/9504/image17xp.png[/img][/img]

_________________
04 rocky mountain edition,4X4,flame red,sunroof,class3 hitch,limited slip,tow hooks,safari rack,3-6"-130W lights on front of rack,2-55W rectangle backup lights on rear of rack,emergency strobes,K&N intake,magnaflow exhaust, just the things the wife needs to navigate her way to work & the mall!

Well I found the problem. Dealer actually snapped the mount that's under the t-case shifter. That's why my console is all jacked up now. So...looks like now I'm headed back to the dealer for an entire console.

Thanks for the help. I didn't realize you could just pop the shifter cover out like that.

_________________

2005 Stone White KJ Limited CRD 4x4
Off-Road Pkg
Trac-Lok
Emu 790s/948s
Skyjacker H7088s rear/Bilsteins front
15x7 Black Rock Lobos/31x10.50 Firestones
GDE HOT Tune + TCM Tune
Euro TC
CB radio
Thrush Turbo muffler
AEM DryFlow filter