Rear coil rating CRD?

Cali KJ · **Posted:** Wed Apr 01, 2009 3:12 pm

Is there a differance in REAR coil rating between gassers and CRDs. I know there is for the front. Thanks in advance.

Fulltimer · **Posted:** Wed Apr 01, 2009 5:49 pm

From what I have read they are the same.

Terry

Cali KJ · **Posted:** Wed Apr 01, 2009 5:52 pm

ok thanks. Yeah i haven't been able to find anything that says differant either.

fastRob · **Posted:** Wed Apr 01, 2009 7:43 pm

When my springs went flat at 20,000 milesthe dealer offered to replace.
I asked if with the same stuff.
He said "yes."
I said, "No thanks."
I went with Old man Emu. Call the technical service number. You will be asked about your uses. There are differences.
I have the 2" LIFT.
I THINK 1" WOULD HAVE BEEN IDEAL. Hind sight being 20/20 and all.
The stock junk pissed me off. Done the ball joints yet? Go with Moog.

Cali KJ · **Posted:** Thu Apr 02, 2009 2:52 pm

fastRob wrote:

When my springs went flat at 20,000 milesthe dealer offered to replace.
I asked if with the same stuff.
He said "yes."
I said, "No thanks."
I went with Old man Emu. Call the technical service number. You will be asked about your uses. There are differences.
I have the 2" LIFT.
I THINK 1" WOULD HAVE BEEN IDEAL. Hind sight being 20/20 and all.
The stock junk pissed me off. Done the ball joints yet? Go with Moog.

Mine is an 04 gasser and looking to add CRD coils to my 2.5 daystar :twisted:

Might be a little stiff for a bit but they will last forever (almost) And looking at my options now for the rear.

tonycrd · **Posted:** Thu Apr 02, 2009 4:22 pm

If you want an even bigger lift try to find some '02 springs....pre-lowered..

You'll gain an extra inch over the later springs. I have a set for ya lying around but...we are really far apart so shipping will be a $$ enterprise...

So the set you are able to buy now will do you just fine I guess, with the Daystar...

Here's a pic of my then stock '02 next to an '03 with the same engine.

Rear coil rating CRD?

Who is online