oldnavy wrote:
Well Mitch any word for those here that might need or want to do this mod.
Guess I need one of those little round wooden things my grandfather used to talk about - a round tuit.
Just been too bloody busy with other stuff the last few days to pursue it any further. Like remembering I've got 20 new batteries in the back of my electric that needed cables made up for them. Good upper body exercise, crimping cast copper lugs onto 2/0 welding cable. Subaru was way past due for inspection, sister trying to purchase a house, etc, etc.
I did call the company and spoke with one of their techs. According to the service manual, there's two signal wires from the pedal, one to the ECM, and another to the tranny control module. According to their tech, you'd need to install the filter in the wire to the tranny module, solder connection being preferable.
But, after finding out that '05 was the first year they used an electronically modulated converter clutch with this tranny, there's the definite possibility it IS a software issue. They use this same tranny and EMCC on the '05 Dakotas. I'd like to check the Dakota forums first and see if they're having the same problems, and what if any solution they've found. A little leg work might save us some grunt work.
Login
Register
FAQ
Search
