Bought a set of slim fog light to add a bit of brightness to the stock candle light.
I fix the wiring through the firewall (Thanks to you guys) but now i can't see how to fix the light to the original bumper.
The thing is that there a space (3-4cm) between the bumper plastic cover and the metallic bumper structure.
I can't secure the lights to the plastic (far too soft).
Does any one has an idea on what to use to fill-up this gap?

Thanks in advance !

_________________
Silver CRD
ASFIR skid front & central elements, MOPAR gas tank skid - SAMCO Turbo hoses - 4 breathers extension
2006 gaser airbox - Frankenlift with Koni at front.
Airtex lift pump

Actually that's where mine are attached too. There was a write up a few years ago about it. We just used the largest washers on the top and bottom. I'll see if I can find the write up. Mine don't move at all and I have had them there for over 2 years.

_________________
2005 4x4 Sport
Yakima Low Riders
Hidden Hitch
MOPAR tow hooks
RL Skink Step Sliders
Magnaflow
3/4 armored
235/70/16 Grabber AT 2
and a lot of little stuff...

found it

viewtopic.php?f=1&t=15718

_________________
2005 4x4 Sport
Yakima Low Riders
Hidden Hitch
MOPAR tow hooks
RL Skink Step Sliders
Magnaflow
3/4 armored
235/70/16 Grabber AT 2
and a lot of little stuff...

Cool, thanks a lot !
just pm the guys who managed to fix them.
Rather frustrating not to be able to fix these lights, sounded such an easy mod...

_________________
Silver CRD
ASFIR skid front & central elements, MOPAR gas tank skid - SAMCO Turbo hoses - 4 breathers extension
2006 gaser airbox - Frankenlift with Koni at front.
Airtex lift pump