Well it's almost time to change the timing belt. Lucky for me I get to do it on my 06 VW TDI too, at the same time.

Does anybody know of a place here in Phoenix where one could possibly rent the tools to do such a job (on both)?

I know others here have to be close to changing theirs too. Maybe we should have a big timing belt party?

GDE rents the tools.

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP

If you are gong to party, count me in - At least to watch- I am at 91K right now AND I too have an 06 TDI Jetta ready for a timing belt. But my main interest is the timing belt change on the Liberty.

So if you do the procedure I want to be there.
I will try to think of a place to do this but can't think of any.


Roland

_________________
2006 CRD LTD 2.8L VM Motori turbo,CAC, 100K-new timing belt
ORM-SEGR, Trans cooler, CLIII hitch front/rear, Journey HD controller
Mopar skids,"Stone Soup" rails, KK clevis fork 1" mild lift w/Daystar stops
215x85 LRD BFG Commercial A/T's, Rola Rack, V6 airbox, Fumoto valve
10K winch, B5 Biodiesel (ULSD CP3 lube)
Its a Diesel baby!

I had to trade my 06 Jetta in to get the Lib

I'd be in for the party (91k and counting) but I'm a little too far away.

_________________
2005 CRD Midnight Blue
GDE Tune
Moog Ball Joints
No Exhaust Brake

Winter Diesel Summer Diesel

1-800-PIK-A-BIZ
Everyone's toll free number and then some

I rent the VW tools, have the parts too!

_________________
For VW parts www.metalmanparts.com
1999 NB TDI SOLD AT 197,000 MILES
2006 CRD
2006 Jetta TDI

So you are willing to "Rent" them for a small fee?
I would be willing. Send me a PM or post as I'm sure others are interested too.
Also for the VW TDI as well.
I am supprised (well not really) as how many have the diesel VW's too.

PM communications......
Turning wenches will be the order of the day for this party... looking forward to this Turbo Tim.

Roland

_________________
2006 CRD LTD 2.8L VM Motori turbo,CAC, 100K-new timing belt
ORM-SEGR, Trans cooler, CLIII hitch front/rear, Journey HD controller
Mopar skids,"Stone Soup" rails, KK clevis fork 1" mild lift w/Daystar stops
215x85 LRD BFG Commercial A/T's, Rola Rack, V6 airbox, Fumoto valve
10K winch, B5 Biodiesel (ULSD CP3 lube)
Its a Diesel baby!

Anyone want to schedule the same as an East Coast event?

I am at 88K and will be looking for a dealer to do this. If I could get a tool set then mayeb I will do this myself. I lost a ebay bid on a set of tools back in 2008.

_________________
No longer a CRD or Jeep owner. Selling everything I have, needs to go as I need the room for a project.

Count me in for the East Coast Timing belt event.

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

I would go for sure if you were near me!!! I'm due for a belt!

_________________
-05 Dark Khaki Limited CRD. GDE ECO tune. In-tank lift pump, Transgo doo doo kit, B&M trans cooler, replaced trans solenoid pack and filters, Newer Michelin tires, Timing belt with all related parts replaced at 110,000miles.