It is currently Tue Apr 14, 2026 10:32 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 63 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 Post subject: Re: Interior LED Swap
PostPosted: Tue Mar 23, 2010 1:20 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Mar 07, 2009 1:58 am
Posts: 820
Location: Ohio
I just ordered a pair of the SMD's in RED to match the map/dome lights I ordered.

now I just have to get my offroad rated underbody rock lights in YELLOW

_________________
L.O.S.T.# AM091337
2006 Voodoo Edition
EVIC
Franken/Jacked
265/75 Duratracs
Skid Row Skids
RED LED Overheads and Footwells
Custom TJ Bumper
4x 100w Hellas on rack
Nokya Hi-Watt headlight bulbs
Blacked Stockers
Thrush Welded muffler
K&N Filter
Custom Boiler Rack

Soon:More Lights, ARB/Winch


Top
 Profile  
 
 Post subject: Re: Interior LED Swap
PostPosted: Fri Jun 03, 2011 1:50 am 
Offline
LOST Member

Joined: Wed Aug 20, 2008 3:06 am
Posts: 166
Location: Melbourne Australia
Hey Infernicus,

How did you manage to run the wires from the led, through the mirror's hinge assembly?

_________________
07 Cherokee/Liberty Limited 4x4
CRDStu 2.5" Lift, JBA's 4.5 UCA's
ARB Winch Bar, WARN XD9000 Winch
Light-Force 170's
3.7 Petrol / Auto
Sun Roof
Tow Pack,Scan GuageII
Reversing Camera
(pretty much stock, really)


Top
 Profile  
 
 Post subject: Re: Interior LED Swap
PostPosted: Mon Jun 27, 2011 6:13 pm 
Offline
LOST Newbie

Joined: Mon Jan 03, 2011 6:18 pm
Posts: 33
infernicus wrote:
riptricket wrote:
so all you did on the puddle lights was run two wires.. ground and power...
no relay? or anything?
thinking about doing this as well!


Yeah, it's easy as that. These LEDs are set up to work with a 12 volt system, and draw little power, so pretty much plug and play. On my '07 Sport, it didn't come with the foot well lights, but the wiring is already there.. so all you have to do is tap into it and it works like factory.
Doing the puddle lamps are a little annoying, because you have to feed the wires through the door harness, take off the door panel and take off the mirror. A little time consuming. But not terrible. The only thing I would do differently is add another light to the inside of the door facing down, or at the bottom of the door. The LED on the mirror produces great light when you're getting into the truck. But when you're getting out, the light is on the outside, it doesn't illuminate where you will actually be stepping. Enough ambient light comes from the dome light so its not terrible, but while you're running wires and have the door panel off, might as well do it all at once.

Any other questions, let me know!


Hello, I do have as well a sport'07 that did not come with foot well lights (very annoying) how can I check if the wiring is already there , would you lind to describe me how the connector look like ( if any ) ?? (pics very very welcome !!! )
Thank you


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 63 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com