It is currently Mon Jan 12, 2026 11:58 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: modifying upper isos.....????
PostPosted: Tue Jun 29, 2010 12:43 am 
Offline
LOST Newbie

Joined: Sun Jun 20, 2010 11:54 am
Posts: 90
Location: belleville, il
so has anyone tried to snip the little rubber nipples off the spring side of the iso that actually makes contact with the spring (or they're supposed to when they are used as the only upper iso).... i just thought the two extra ones im gonna add above my stock ones might sit a little more flush and stack better on top if i smooth them out a little bit. ill leave them on the stock one for the retention purposes...... just a thought........

_________________
2003 Liberty Renegade (Black)
(FRONT)..................(REAR)
OME 927's..............OME 948's
Rancho 17505's......Rancho 17004's
3 conduit nuts........extra iso's
3/8" top plate
-JBA Gen 4.5 A-Arms
-Terraflex front bumpstops
-double hockeypuck rear bumpstops
-245/75/16 General Grabber AT2's
-factory skids
-stock bumpers and trim


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Tue Jun 29, 2010 8:23 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
They work just fine the way they are. No problems at all with them sitting where they should and staying there. :wink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Tue Jun 29, 2010 9:32 am 
Offline
LOST Newbie

Joined: Sun Jun 20, 2010 11:54 am
Posts: 90
Location: belleville, il
sweet.... ill leave em alone then..... thanks tom

_________________
2003 Liberty Renegade (Black)
(FRONT)..................(REAR)
OME 927's..............OME 948's
Rancho 17505's......Rancho 17004's
3 conduit nuts........extra iso's
3/8" top plate
-JBA Gen 4.5 A-Arms
-Terraflex front bumpstops
-double hockeypuck rear bumpstops
-245/75/16 General Grabber AT2's
-factory skids
-stock bumpers and trim


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Tue Jun 29, 2010 10:21 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Still kind of on topic...

What is the maximum number of rear upper isolaters to use safely?

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Tue Jun 29, 2010 10:25 am 
Offline
LOST Newbie

Joined: Thu May 06, 2010 2:44 pm
Posts: 30
Location: Fort Wayne, IN
3 is the limit. 3 total.

_________________
2004 Jeep Liberty Rocky Mountain Edition
•McGard lugs
•Mopar Hitch
•Courtesy lights!
•Mopar Tow Hooks
•EVIC with homelink
•Boiler's Top Plates
•OME 927 & 948 RSX17004s and RSX17505s


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Tue Jun 29, 2010 10:26 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
3 total on the uppers,
two plus the stock one

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Tue Jun 29, 2010 11:10 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Sweet thanks! :D

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Wed Jun 30, 2010 3:42 pm 
Offline
LOST Newbie

Joined: Sun Jun 20, 2010 11:54 am
Posts: 90
Location: belleville, il
ill be adding 2 per side to the rear.... just ordered those and a-arms from JBA..... im also doing a 3 nut clevis lift to match the 2 extra iso's..... hope she sits level and pretty for me..... :D

_________________
2003 Liberty Renegade (Black)
(FRONT)..................(REAR)
OME 927's..............OME 948's
Rancho 17505's......Rancho 17004's
3 conduit nuts........extra iso's
3/8" top plate
-JBA Gen 4.5 A-Arms
-Terraflex front bumpstops
-double hockeypuck rear bumpstops
-245/75/16 General Grabber AT2's
-factory skids
-stock bumpers and trim


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Thu Jul 01, 2010 9:56 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Ended up ordering them new.
All three sites seem to be exactly the same.
The sites call them "Spring insulator, liberty, upper"
So, two Isolators plus shipping came out to be:
http://www.chryslerpartsdirect.com $29.30
http://www.wholesalemopar.com $29.24
http://www.moparpartsamerica.com $28.55

I ordered them from Chrysler parts direct, because that's where I got them last time, I didn't feel like making a new account to save $0.75.

*A note about http://www.chryslerpartsdirect.com - They charge you shipping after they send them out, so if you want to know exactly what you're paying use one of the other sites.

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Thu Jul 01, 2010 11:41 pm 
Offline
LOST Newbie

Joined: Sun Jun 20, 2010 11:54 am
Posts: 90
Location: belleville, il
i had marlin throw 4 of them on my order when i ordered my a-arms from him at jeepinbyal....... they were only 12.65/each..... :goink: do the ones you got come in pairs or is that just the stealership prices......

_________________
2003 Liberty Renegade (Black)
(FRONT)..................(REAR)
OME 927's..............OME 948's
Rancho 17505's......Rancho 17004's
3 conduit nuts........extra iso's
3/8" top plate
-JBA Gen 4.5 A-Arms
-Terraflex front bumpstops
-double hockeypuck rear bumpstops
-245/75/16 General Grabber AT2's
-factory skids
-stock bumpers and trim


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Thu Jul 01, 2010 11:46 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Each one was like 9$ plus shipping. So the total came out to ~30$ for two.
Since you were paying for shipping already you got a good deal.

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Thu Jul 01, 2010 11:48 pm 
Offline
LOST Newbie

Joined: Sun Jun 20, 2010 11:54 am
Posts: 90
Location: belleville, il
i stand corrected..... i thought that price was for only one......... thats not bad for two

_________________
2003 Liberty Renegade (Black)
(FRONT)..................(REAR)
OME 927's..............OME 948's
Rancho 17505's......Rancho 17004's
3 conduit nuts........extra iso's
3/8" top plate
-JBA Gen 4.5 A-Arms
-Terraflex front bumpstops
-double hockeypuck rear bumpstops
-245/75/16 General Grabber AT2's
-factory skids
-stock bumpers and trim


Top
 Profile  
 
 Post subject: Re: modifying upper isos.....????
PostPosted: Thu Jul 01, 2010 11:54 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
Oh, haha, I would've cried if each one was 30$ !
Thats 120$ for about an inch of lift in the rear, lol.

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com