Check it out

http://www.glowshiftdirect.com/3in1-Com ... Gauge.aspx

_________________
2006 LTD Bright Silver loaded with all the needed mods, CCV intact.
Proudly supporting CRD vendors, and their development of quality parts and accessories.
Equipped with HDS thermostat, plenty of heat, faster warm-ups, increased fuel mileage.

Nice looking, would be great if I didn't already have the boost and EGT separately.

Anybody want to buy those off me?

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.

That's a really nice option. 60psi is a bit too much range though.

I am looking at these gages right now. http://www.mcnallyelectronics.com/boost_psi_egt.htm

They have many combos available of 2 gages on one face.
I think Boost/EGT and oil temp/psi in a dual pillar pod would be nice.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
RL super sliders, Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.

i just bought an 05 limited CRD and this would be cool, but i think it would be cooler if it had trans. temp.

_________________
05 CRD Limited, SEGR Kit, EHM, Selectrack Alpine DVD, 6000k HID headlights, Aux Lift Pump, 2.5" straight pipe, Diablo Extreme Puck, Euro converter
02 SLT Cummins H.O. 6spd manual with southbend 3850dd, fass 150hd, ddp 150hp injectors, arp studs, adrenaline stacked w smarty, traction bars, 6 inch stacks, level kit, bhaf

They make that combination too.

http://www.glowshiftdirect.com/3in1-die ... auges.aspx

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
RL super sliders, Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.

So are you saying the temp can be any temp you want. Boost then EXT temp and the TEMP part is any temp reading. For example trans??

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

Yep.
Or hook oil temp and trans temps senders to a multi-position switch and toggle between them on your gage display.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
RL super sliders, Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.

sweet, does anyone know if there is a gauge pod that will fit this? i really would like to avoid screwing it down on my dash.

_________________
05 CRD Limited, SEGR Kit, EHM, Selectrack Alpine DVD, 6000k HID headlights, Aux Lift Pump, 2.5" straight pipe, Diablo Extreme Puck, Euro converter
02 SLT Cummins H.O. 6spd manual with southbend 3850dd, fass 150hd, ddp 150hp injectors, arp studs, adrenaline stacked w smarty, traction bars, 6 inch stacks, level kit, bhaf