Here is a quick write up from Pippobug - orig post can be found in the KJ 4X4 section of the forum
Hi,
for those how might be instrested, I changed mine today and now I have finally a 4 speed blower again. If the photos look different to what you might be expecting, it's beause my steering wheel sits on the wrong side, my KJ is a UK model.
I have attached some photes and the part number you need for a 2003 model (I have a CRD, but I think this will work for none CRD to) is: 05139719AA. Let see how long it last now.
New and Old part side by side, the IRCTF changed from 236 to 306

Where it's located, but please note my KJ is a UK one so on a US might be in a different place, but gives you an idea of what it looks like and what you should be looking for.

What my old one looked like when it came out!!! that's why it wasn't working...

Now tricky bit... be carefull of the RED clip, it's fiddly to release and the new part doesn't come with a new red clip and if you break it it's not going to be securely fitted and might not work.

The whole pulling out & re fitting took me about 15min max and now it's working
Hope this helps.
Fil.
