It is currently Sat Oct 04, 2025 3:17 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Looking for a harness adapter for an aftermarket Navigation
PostPosted: Fri Sep 10, 2010 3:15 pm 
Offline
LOST Newbie

Joined: Fri Sep 10, 2010 2:59 pm
Posts: 4
Location: Constantine, MI
Been looking for a harness to install a Pioneer Nav unit in the Liberty just not sure which one to get. Crutchfield has a PAC's C2R-CHY4 for $129 but I've found them as low as $69. I've found others that say they fit an 08 Liberty w/o factory sub for $10. Question is which one do I really need? Right now it just has the factory AM/FM/CD player in it. If anyone has installed an aftermarket Nav which harness worked for you? Thanks.


Top
 Profile  
 
 Post subject: Re: Looking for a harness adapter for an aftermarket Navigat
PostPosted: Fri Sep 10, 2010 4:42 pm 
Offline
LOST Addict
User avatar

Joined: Thu Oct 29, 2009 5:59 pm
Posts: 2127
Location: Navarre FL
if you don't have the mygig or steering wheel controls or any other fancy factory radio parts then the cheap one should do. Its what I have in my KK with clarion head unit.


Top
 Profile  
 
 Post subject: Re: Looking for a harness adapter for an aftermarket Navigat
PostPosted: Fri Sep 10, 2010 4:49 pm 
Offline
LOST Newbie

Joined: Fri Sep 10, 2010 2:59 pm
Posts: 4
Location: Constantine, MI
DirtyKK wrote:
if you don't have the mygig or steering wheel controls or any other fancy factory radio parts then the cheap one should do. Its what I have in my KK with clarion head unit.


Will the cheaper harness still allow Navigation?


Top
 Profile  
 
 Post subject: Re: Looking for a harness adapter for an aftermarket Navigat
PostPosted: Fri Sep 10, 2010 5:31 pm 
Offline
LOST Addict
User avatar

Joined: Thu Oct 29, 2009 5:59 pm
Posts: 2127
Location: Navarre FL
The nav is built into my headunit and just has an external antenna on my dash


Top
 Profile  
 
 Post subject: Re: Looking for a harness adapter for an aftermarket Navigat
PostPosted: Fri Sep 10, 2010 5:33 pm 
Offline
LOST Newbie

Joined: Fri Sep 10, 2010 2:59 pm
Posts: 4
Location: Constantine, MI
DirtyKK wrote:
The nav is built into my headunit and just has an external antenna on my dash


The Pioneer unit I'm looking at is the same way so I guess I can save $100. You wouldn't happen to know what harness you used?


Top
 Profile  
 
 Post subject: Re: Looking for a harness adapter for an aftermarket Navigat
PostPosted: Fri Sep 10, 2010 5:42 pm 
Offline
LOST Addict
User avatar

Joined: Thu Oct 29, 2009 5:59 pm
Posts: 2127
Location: Navarre FL
its been almost a year since I installed it and I really have no clue. I think I bought the mount bracket and harness together as a kit on ebay.


Top
 Profile  
 
 Post subject: Re: Looking for a harness adapter for an aftermarket Navigat
PostPosted: Sun Mar 27, 2011 9:19 am 
Offline
LOST Newbie
User avatar

Joined: Sat Dec 04, 2010 9:47 am
Posts: 73
Location: Central NJ
Bumping this back up.

Looking to get this head unit for my wife for her birthday: Clarion CX501

She doesn't have steering wheel controls and doesn't have a factory sub... From reading the replies in this thread, I don't need the special $130 PAC? This is what one of the installation notes says:
Quote:
Your vehicle has no accessory power lead at the receiver. The integration adapter provides the accessory power you will need for your new receiver.
PAC C2R-CHY4 $129.99


Ive installed a lot of car stereo stuff... so im not a novice in this department. Just haven't done a newer Chrysler vehicle so im not sure about this PAC unit..

jlemon, you ever get yours installed? Wondering what harness you bought.

_________________
2007 Jeep Commander Limited, 5.7L Hemi w/QD-II, 2" OME HD, 32" Duratracs, Fully Armored.
2008 Jeep Liberty Sport 4x4, basically stock.


Top
 Profile  
 
 Post subject: Re: Looking for a harness adapter for an aftermarket Navigat
PostPosted: Sun Nov 06, 2011 3:31 pm 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Mon Sep 06, 2010 5:52 pm
Posts: 2172
Location: NEVADA
So my girlfriend is looking to get me an aftermarket in dash nav/dvd player and we are both confused on this as well. Do we need the pac c2r-chy4 harness if i don't have the steering wheel controls, sub, or mygig? My stock unit is just the low end one without the uconnect enabled. Sonicelectronix.com says i still need it because my stock unit still goes through the canbus2 system, but the guy i talked to didn't sound 100% confident. This is the back of my stock head unit:
Image
Also a dumb question: our kks have a double din size right?

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS


ATHFAB.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com