Vinyl Haed light applicas

tools113 · **Posted:** Fri Nov 26, 2010 4:53 pm

(Flat black. Thanks for taking the time to go by there that is awesome. Wasn't sure how I was going to go about getting them the proper measurements.)
I talked to them and they said that they will measure mine next week. I went to look at a renny today and seen what is intailed - I don't think it will be a problem at all. The color on the Renegade is kinda grayish - its considered Matt finish

tools113 · **Posted:** Fri Nov 26, 2010 4:55 pm

(For that price ill buy a pair of Inferno Red colored if they could have just a circle for the headlight and not the fog since i dont have fogs) I went with their color chart and they can come close but not exact if thats ok

ataunton · **Posted:** Fri Nov 26, 2010 5:59 pm

These are the color codes that are used when ordering touch up paint. Not sure if these would apply to vinyl color as well. To verify the color code of your vehicle check the sticker that has the tire information on the drivers door.

Paint Codes by ataunton, on Flickr

tools113 · **Posted:** Fri Nov 26, 2010 6:25 pm

no sorry to say they dont with vinyl

tools113 · **Posted:** Sat Nov 27, 2010 2:03 pm

(Nice! I want a set. Any idea if the same place can do a black hood decal like on the Renny's?)
they are sorry to say they are unable to do the hood decal - the machine they have can only handle 30" wide vinyl and the smallest measurement on the hood decal is 35"
sorry
:cry:

ataunton · **Posted:** Sat Nov 27, 2010 10:28 pm

tools113 wrote:

(Nice! I want a set. Any idea if the same place can do a black hood decal like on the Renny's?)
they are sorry to say they are unable to do the hood decal - the machine they have can only handle 30" wide vinyl and the smallest measurement on the hood decal is 35"
sorry
:cry:

No worries. Thanks for looking into it. I'll look up some sign shops around here and see if I can get one done. Really like the look, but don't want to spend the $260 it costs to get one through the dealership.

Cherrie 274 · **Posted:** Wed Dec 08, 2010 7:59 pm

Disappointed
Got mine.
Poor fit, color not a match.

Elt31987 · **Posted:** Wed Dec 08, 2010 10:36 pm

I just ordered inferno red with just a cut out for the headlights, no foglight. Hope mine turns out better, but for 12 bucks I guess you can't complain

tools113 · **Posted:** Wed Dec 08, 2010 11:04 pm

(Disappointed)
Did you heat the vinyl with a hair dryer or heat gun. The edges will wrap around the lenses. Mine fit real good.
Color match is tuff with vinyl since you cant match color codes.
But sorry about if disappointed.

Elt31987 · **Posted:** Mon Dec 13, 2010 1:26 pm

Mine came, red is much too dark and it was bent during shipping causing a big crease wrinkle in it. O well 17 bucks down the drain, ill move on

tools113 · **Posted:** Mon Dec 13, 2010 2:20 pm

Crease will come out when applied

tools113 · **Posted:** Mon Dec 13, 2010 2:22 pm

I am sorry that this has not worked out for everyone. Color match is a problem I guess. Vinyl does not always match color codes of cars.

DetroitKK · **Posted:** Mon Dec 13, 2010 3:24 pm

Yikes, those white decals look pretty rough... For half the price and a little elbow grease you could just paint the inside of the housing. I think the end result looks better too. You get the same shape but with a little more depth of vision. Go with Black-outs!

(or red or white or blue-outs :ROTFL:

)

Cherrie 274 · **Posted:** Mon Dec 13, 2010 7:35 pm

Tools113,please do not feel bad everyone has different likes dislikes.You did try so I give you thumbs-up.

spymoto · **Posted:** Tue Dec 14, 2010 12:06 am

ataunton wrote:

Nice! I want a set. Any idea if the same place can do a black hood decal like on the Renny's?

Are you talking about the "Renegade" decal that people put on the sides of the hood like mine? I do graphics if you need a set.

DirtyKK · **Posted:** Tue Dec 14, 2010 1:25 am

i think he wants the large hood decal on the kk not the renegade lettering.

too bad the colors arent a match i woulda bought some. maybe some matte black ones would still look good.

ataunton · **Posted:** Tue Dec 14, 2010 9:03 pm

spymoto wrote:

ataunton wrote:

Nice! I want a set. Any idea if the same place can do a black hood decal like on the Renny's?

Are you talking about the "Renegade" decal that people put on the sides of the hood like mine? I do graphics if you need a set.

Thanks for the offer, but I am looking for the large decal that comes on the hood of the KK Renegade.

spymoto · **Posted:** Wed Dec 15, 2010 4:37 am

ataunton wrote:

spymoto wrote:

ataunton wrote:

Nice! I want a set. Any idea if the same place can do a black hood decal like on the Renny's?

Are you talking about the "Renegade" decal that people put on the sides of the hood like mine? I do graphics if you need a set.

Thanks for the offer, but I am looking for the large decal that comes on the hood of the KK Renegade.

Are you talking about the ugly plain black square? If I were you I'd do something like this...

This would look MUCH MUCH better!!! :2cents:

ataunton · **Posted:** Wed Dec 15, 2010 9:00 pm

spymoto wrote:

Are you talking about the "Renegade" decal that people put on the sides of the hood like mine? I do graphics if you need a set.

Thanks for the offer, but I am looking for the large decal that comes on the hood of the KK Renegade.[/quote]

Are you talking about the ugly plain black square? If I were you I'd do something like this...
This would look MUCH MUCH better!!! :2cents:

[/quote]

I am talking about the ugly plain black square. That picture looks pretty cool. I emailed a sign shop yesterday about making the decal I want. If they come back saying they can do it, maybe I'll look at dressing it up a bit.

DirtyKK · **Posted:** Fri Dec 17, 2010 5:11 am

the "ugly" black square is better looking in my opinion. the other one looks too Japanese vehicle'ish to be on a Jeep.

edit: wtf?! (Japanese vehicle) is edited to "japanese vehicle" who comes up with what words are edited on this forum?

Vinyl Haed light applicas

Who is online