265/70/16 on stock renegade wheels

NOVARENE · **Posted:** Fri Dec 03, 2010 2:30 pm

Hey guys,

Im thinking of going wider and getting 265/70/16s. Will I be good, I have trimmed a little already but will the tires be too wide for the wheels? I have spacers that are not installed but would I have to install the spacers so that I do not have serious rubbage?

Thanks

long_tall_texan · **Posted:** Fri Dec 03, 2010 3:37 pm

That is basically a 31x10.50. They will be fine on a stock wheel with your lift setup. Adding spacers would actually increase the possibility of rubbing.

DirtyKK · **Posted:** Fri Dec 03, 2010 3:44 pm

if you try and put them on a stock rim with stock backspacing you may rub the tire and uca. you should be fine with the spacers, maybe have to trim a little more depending on what youve done now.

blackwidowkj06 · **Posted:** Fri Dec 03, 2010 9:36 pm

I ran 265/75/16's for 2wks with a daystar lift, until i could buy brand new 245/75/16's for my Liberty. I ran them on stock wheels, but they did rub because I didn't trim my bumper like some of these guys do. You'll be fine, just have some rubbing.

tommudd · **Posted:** Fri Dec 03, 2010 11:48 pm

[quote="blackwidowkj06"]I ran 265/75/16's for 2wks with a daystar lift, until i could buy brand new 245/75/16's for my Liberty. I ran them on stock wheels, but they did rub because I didn't trim my bumper like some of these guys do. You'll be fine, just have some rubbing.[/quote

OP is asking about 265-70-16s little difference :wink:

blackwidowkj06 · **Posted:** Sat Dec 04, 2010 12:02 am

Not that much difference...just abit wider and not as tall :mrgreen:

Dave08 · **Joined:** Fri Nov 02, 2007 4:17 pm **Posts:** 250

blackwidowkj06 wrote:

Not that much difference...just abit wider and not as tall :mrgreen:

265/75= ~32/10.5
265/70= ~31/10.5

So same width but the 265/75/16's are taller

265/70/16 on stock renegade wheels

Who is online