I got my new sensor in and it has two mounting holes, is this correct? The MAP is on the very back top of the engine with a 4mm allen holding it and a 3-wire plug right?

I don't know which year you have but on my 06 CRD, I just took mine off to clean couple weeks ago and it only has one (1) mounting screw which is 4mm allen head. Does not have 2 mounting screws.

Steve
06 CRD
AZ.

sound like you got a wrong part maybe a MAF

_________________
05 liberty CRD Limited - suncoast TC , GDE Turbo , GDE TCM Tune 2gen OEM filter head, stant 195 tsat, Autoandart Window Fix, New TB kit ~190k (Geordi)
06 Liberty CRD Limited - stant 195 tstat Autoandart Window Fix, 2gen OEM filter head, New TB kit ~180k (Geordi), GDE Turbo, GDE TCM ECO tune

Going to post just the same thing.
Check if it looks like the sensor on the air intake box.

You may have been another victim of the incorrect parts fiches, the parts fiches, and many of the online ordering sites, will incorrectly list them.

This is not the first time this has happened.

Care to post a picture of what your talking about?

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

The MAF is over on the air filter. Look and see if that's what you got

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)

Use this link in the future to look up the exact part first.

http://www.berrysprinter.com/jeepparts.php

Compliments of TJKJ with the orange KJ "GASSER"

JK TJ

Actually I have a cast iron engine mount setting on my work bench, it was the wrong part when I ordered a rubber engine mount, but not worth the money to send it back.

_________________
2006 LTD Bright Silver loaded with all the needed mods, CCV intact.
Proudly supporting CRD vendors, and their development of quality parts and accessories.
Equipped with HDS thermostat, plenty of heat, faster warm-ups, increased fuel mileage.

I know it is not the MAF. I thought maybe it was a new universal style that you would only use one bolt hole. Funny thing is that I put my VIN in with MOPARpartsamerica.com and that is what they sent me. Also the guy at Autozone came up with the same part last night. I will try to get a picture of it up tomorrow.

Is the plug the same as your existing one?

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

Also, does it look like this?

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

yes it does look like that. What is it?

Thats a sensor for the 2002-2004 KJs, sounds like there was some kind of mixup. What part number does the box have?

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

So was there any resolution to this?

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic