It is currently Mon Oct 27, 2025 11:27 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: 04 LIBERTY 3.7 BLOWN HEAD GASKET
PostPosted: Thu Jan 20, 2011 11:14 am 
Offline
LOST Newbie

Joined: Thu Jan 20, 2011 5:07 am
Posts: 6
Location: IMPERIAL PA
HI

brand new on here from pittsburgh, my 04 3.7 has a head gasket blown. fix is $1300 at shop. but cash is low, its got 111,000 mi and i'm thinking of useing THERMAGASKET, anyone have any info on this stuff? this is my only ride, and i need it to be reliable. but this might be my only option. any help would be great.


THANKS



04 KJ LIBERTY


Top
 Profile  
 
 Post subject: Re: 04 LIBERTY 3.7 BLOWN HEAD GASKET
PostPosted: Thu Jan 20, 2011 11:17 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Get the head gasket replaced,better off having both sides replaced.Sure it's alot off $$$ but it's fixed right.


Nothing can fix a bad head gasket besides replacing the head gasket.


Top
 Profile  
 
 Post subject: Re: 04 LIBERTY 3.7 BLOWN HEAD GASKET
PostPosted: Fri Jan 21, 2011 7:45 am 
Offline
LOST Newbie

Joined: Thu Jan 20, 2011 5:07 am
Posts: 6
Location: IMPERIAL PA
THANKS
i know i'd rather fix it right, but i'm out of work and moneys really tight. boy this things not like " my old cj's were" bullet proof.
i'll let you know how it works out? I HOPE THIS DON'T TURN UGLY :grim:

Well I used the Thermagasket as directed and it went 3 yrs and over 100,000 miles. never missed a beat. NO PROBLEM'S
it worked great. jeep got wrecked last month. and I was using it for long trips plus towed heavy trailers also. this stuff really worked for me. 100 % happy.


Last edited by REDLIBERTYGUY on Sat Jan 25, 2014 5:46 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: 04 LIBERTY 3.7 BLOWN HEAD GASKET
PostPosted: Fri Jan 21, 2011 6:03 pm 
Offline
LOST Newbie
User avatar

Joined: Thu Dec 09, 2010 9:39 am
Posts: 76
Location: Panama
I think your about to turn a $1,300.00 repair into a real big one. When you mix engine liquids where their not supposed to be REAL bad things happen. Think hard on that one. :shock: Get another estimate from a reputable shop and have them explain everything involved.

_________________
If it xly's, xucks, or xloats rent it.
1978 CJ5 304,T18,DANA20,MSD,EDELBROCK X3,MALLORY,D44,DETROIT LOCKER,LONG WAY TO GO
2006 LIBERTY Sport, Franky II PREM, moab's, 245/75/16 KM2's, All JL audio system, LIMO TINT.


Top
 Profile  
 
 Post subject: Re: 04 LIBERTY 3.7 BLOWN HEAD GASKET
PostPosted: Sat Jan 29, 2011 3:02 pm 
Offline
LOST Newbie

Joined: Sat Jan 15, 2011 6:00 pm
Posts: 43
Sorry to hear about your head gasket woes...

I agree that there is no fix other than the correct replacement of the head gasket which will likely include machining the head surface. Be diligent in checking the water pump and the entire cooling system. I would hate to see you roast your engine and blow the new head gasket too.

Best,


Top
 Profile  
 
 Post subject: Re: 04 LIBERTY 3.7 BLOWN HEAD GASKET
PostPosted: Wed Feb 09, 2011 2:44 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Dec 19, 2010 6:24 pm
Posts: 91
Hope you got a better quote than $1300 and are going to avoid using chemicals that could eventually damage other parts.

Look to what caused the problem in the first place (water pump was mentioned above) sometimes something as simple as a bad thermostat for $10 can lead to a warped head and many blown gaskets... pls especially stay away from any stop leak that goes into coolant on newer engines. (Unless you're stuck on the trail and have to crack an egg into your rad or whatever :roll: )

With any luck the head will not have to be replaced, perhaps just decked a bit and a new gasket is not an engine-removing install or anything horrific. If you have to have it towed to a more reputable shop or another town with more garages it can be worth the savings in labour.

:2cents:

_________________
Huntbuggy
02 KJ Sport Silver - 2.5" OME/Bilstein lift, ARB bumper, JBA 4.5s, full factory skids, RS diff cover, rear SuperBumper on Reese 2", 245/75R16 on Cragars


Top
 Profile  
 
 Post subject: Re: 04 LIBERTY 3.7 BLOWN HEAD GASKET
PostPosted: Wed Feb 09, 2011 9:41 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
If you don’t have a job and money is tight, then I would talk to the dealership about trading it for something else that would require no cost or very little cost.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com