Unlimited Black Revenge- Mods [Updated-more pics to come]

Hendricks488 · **Posted:** Tue Jan 25, 2011 6:53 pm

Ever think about adding the KJ Lightbar??

DoubleK · **Posted:** Tue Jan 25, 2011 7:12 pm

if you're talking to me id say no to that bc i dont find it my style. i feel like the lights are too small for me. i want large KC's. and i want them to be HID's as well so the KJ lightbar wouldnt work for me, but thank you! :SOMBRERO:

Jeepin_it_real · **Posted:** Tue Jan 25, 2011 8:31 pm

no KJ bar for me either... i thought about it.. but the idea went out the widow... I'm in the middle of talking with a fabricator to mass produce one that will fit out Liberties ( with and without the sky slider roof)

NewJerseyKK · **Posted:** Tue Jan 25, 2011 8:40 pm

If someone made one that would work with a skyslider... im pretty sure they would go down in history. Would the lights be included or would it be just the bar and you need to buy them on your own?

Jeepin_it_real · **Posted:** Tue Jan 25, 2011 9:18 pm

I guess im going down in history then.... it would be without lights... i dont wanna have to go through the trouble of getting lights n prewirig them... especially cause most people have different applications.. different light types... so lights on and other not etc. The lightbar is gunna be made to hold four 8in lights... i guesw if you wanted more or less lights that could be done

Sent from my Dell Streak using Tapatalk

Hendricks488 · **Posted:** Mon Jan 31, 2011 11:11 am

Jeepin_it_real wrote:

no KJ bar for me either... i thought about it.. but the idea went out the widow... I'm in the middle of talking with a fabricator to mass produce one that will fit out Liberties ( with and without the sky slider roof)

Hot darn!

slipperybrain · **Joined:** Tue Jan 11, 2011 8:07 pm **Posts:** 38

Where did you get the Chrome Door Locks?

zoso7374 · **Posted:** Fri Feb 04, 2011 5:41 pm

Can you explain how you fixed the skyslider noise issue?

Jeepin_it_real · **Posted:** Fri Feb 04, 2011 5:45 pm

all you need to know is here... read the whole thread.. pretty darn good results I must add
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=56847

NewJerseyKK · **Posted:** Fri Feb 04, 2011 6:44 pm

Jeepin_it_real wrote:

all you need to know is here... read the whole thread.. pretty darn good results I must add
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=56847

I cant even begin to tell you how much nicer it is to drive now that Ive done this ^^^. The wind noise is basically gone.

libr8ed · **Posted:** Mon Feb 07, 2011 6:09 pm

Hay whered you get the tail light covers and the third brake light cover?

Jeepin_it_real · **Posted:** Mon Feb 07, 2011 9:46 pm

Tail loghts were sprayed with a product called night shade... the thirsbrake light cover was done by a friend who sells stuff through ebay... he does a lot of diff words.... if u want more info PM me.

Sent from my Dell Streak using Tapatalk

Tbones87 · **Joined:** Fri Feb 18, 2011 9:19 am **Posts:** 12

Hey Jeepin_it_real do you see a big difference in performance with all the things you did? the throttle body, spacer, intake, stage 2, and exhaust.

Jeepin_it_real · **Posted:** Sat Feb 26, 2011 2:34 am

I went from 18 mpg stock to almost 24. As far as power i never dynoed so i cant give u hp numbers but by the seat of my pants, it did help.... pm me if you have more questions. I will explain how i can get even more power from my mods

Sent from my Dell Streak using Tapatalk

black and blue · **Posted:** Sun Jun 12, 2011 3:52 pm

Jeepin_it_real, did you fabricate your front bumper light bar, or does someone sell those? I really like it, but have not been able to find it anywhere!

Jeepin_it_real · **Posted:** Sun Jun 12, 2011 11:40 pm

quadratec.com its the JK hood bar... just drilled holes in my bumper and mounted it with washers and bolts... works great... you have to modify the bracket a little by cutting out hte sides so it fits under the grill correctly but it's very easy to do

black and blue · **Posted:** Tue Jun 14, 2011 6:45 pm

Found it, and I can see where you cut it.

So you think the plastic bumper is plenty strong to hold the bar and a couple lights for the life of the Jeep?

Seems like yours is holding up ok, and it looks awesome

Jeepin_it_real · **Posted:** Tue Jun 14, 2011 7:51 pm

this was a woops

Jeepin_it_real · **Posted:** Tue Jun 14, 2011 7:51 pm

i put a piece of steel under each hole(inside the bumper) i made to spread the weight a bit but yeah i think it's plenty strong... my truck has been wheeled, even been completely airborn and i've had no issues at all

glsec507 · **Joined:** Mon Jul 18, 2011 4:12 pm **Posts:** 59

Awesome work man!!!! I have a cpl questions. Where did u fid the 5 branch military badge and can I get the eBay store name for the third brake light cover???? Also where did u find the Crome molding u have on the back ( one that says revenge)???

And as one poster already asked, those chrome locks???? Where where where

Thanks a lot

Unlimited Black Revenge- Mods [Updated-more pics to come]

Who is online