Fuel return hose fitting

wfd1350 · **Posted:** Wed Apr 13, 2011 11:54 pm

I had a fuel return hose blow off the fuel return fitting(plastic block). I decided to use a hose clamp to keep the hose on the fitting. While tightening the hose clamp I broke the nipple off the block. Here's my question, are those plastic fuel return blocks available individually, or do you have to buy them as a set? Also is there a proper name for what I am referring to? :?:

racertracer · **Posted:** Thu Apr 14, 2011 12:07 am

wfd1350 wrote:

I had a fuel return hose blow off the fuel return fitting(plastic block). I decided to use a hose clamp to keep the hose on the fitting. While tightening the hose clamp I broke the nipple off the block. Here's my question, are those plastic fuel return blocks available individually, or do you have to buy them as a set? Also is there a proper name for what I am referring to? :?:

I bet there is a proper name for what you are referring to and if we knew what it was that you were referring to, we might be able to help.

So what is it that you are referring to exactly? :SOMBRERO:

Let's start with where is this plastic block located.... general vicinity?

wfd1350 · **Posted:** Thu Apr 14, 2011 12:16 am

Sorry. I am referring to the plastic fitting on top of the fuel injectors that flow into the injector return lines. I broke a nipple off on the plastic block, and need to replace the block. Hope that makes sense.

SargeIndustries · **Posted:** Thu Apr 14, 2011 12:28 am

wfd1350 wrote:

I had a fuel return hose blow off the fuel return fitting(plastic block). I decided to use a hose clamp to keep the hose on the fitting. While tightening the hose clamp I broke the nipple off the block. Here's my question, are those plastic fuel return blocks available individually, or do you have to buy them as a set? Also is there a proper name for what I am referring to? :?:

Have to buy them in a set. I broke mine and had to replace all of them...

MACKJ · **Posted:** Thu Apr 14, 2011 8:41 am

wfd1350 wrote:

I had a fuel return hose blow off the fuel return fitting(plastic block). I decided to use a hose clamp to keep the hose on the fitting. While tightening the hose clamp I broke the nipple off the block. Here's my question, are those plastic fuel return blocks available individually, or do you have to buy them as a set? Also is there a proper name for what I am referring to? :?:

Is item 20 what you are after? Part number 5142809AA Fuel return block. Sorry about the poor image as I don't have a full version of Adobe.

wfd1350 · **Posted:** Thu Apr 14, 2011 12:29 pm

After lots of searching I found the proper part number, 5093923AA. It is called a tube fuel spill return. Thanks to all for the help.

Fuel return hose fitting

Who is online