jeep project

dieselenthusiast · **Posted:** Fri Jun 03, 2011 5:27 pm

blackwidowkj06 wrote:

I hope he has some for next March. I would order one but I can't til this September. Anyways, I have to upgrade to OME before I can buy the bumpers

You can give him a call or send a PM and ask. I think he has enough metal cut for 14 bumpers. Out of those 14, I have no idea how many people have already bought one. I personally know a few people (including myself) who have laid down the cash. It will be first come, first serve. I think RL will let you put down money to reserve one. If so, I would get a loan if you have to just to secure one. Not only is it the only rear bumper on the market, but it's perfect in every way.

blackwidowkj06 · **Posted:** Fri Jun 03, 2011 6:20 pm

dieselenthusiast wrote:

blackwidowkj06 wrote:

I hope he has some for next March. I would order one but I can't til this September. Anyways, I have to upgrade to OME before I can buy the bumpers

You can give him a call or send a PM and ask. I think he has enough metal cut for 14 bumpers. Out of those 14, I have no idea how many people have already bought one. I personally know a few people (including myself) who have laid down the cash. It will be first come, first serve. I think RL will let you put down money to reserve one. If so, I would get a loan if you have to just to secure one. Not only is it the only rear bumper on the market, but it's perfect in every way.

I'm riding on the Daystar lift set-up. My Jeep would sag even more than it does now if I had the rear bumper on. I would rather pay in full when I'm ready to purchase. I will be ordering the front bumper and the rear bumper w/ swinging tire carrier. Since the cost would be well over $2,000; I would just asume drive out there to get them and have them installed. Would make for a nice road trip. Wonder how many miles from Somerset, KY to where RL is?

dieselenthusiast · **Posted:** Fri Jun 03, 2011 7:31 pm

blackwidowkj06 wrote:

I'm riding on the Daystar lift set-up. My Jeep would sag even more than it does now if I had the rear bumper on. I would rather pay in full when I'm ready to purchase. I will be ordering the front bumper and the rear bumper w/ swinging tire carrier. Since the cost would be well over $2,000; I would just asume drive out there to get them and have them installed. Would make for a nice road trip. Wonder how many miles from Somerset, KY to where RL is?

Yeah, but if you wait, there's a good chance that all those rear bumpers will be sold. :shock:

The way that Marty was talking, there wont be any rear bumpers offered for a long time. Right now he is offering 15% off his rear bumpers. If I were you, I would lay down some cash to reserve one. You can buy the other stuff anytime of the year. Custom stuff like RL's rear bumpers don't come around very often. He's a fulltime student, not a fulltime custom fabricator. RL is in Colorado Springs, so get out mapquest and start making your plans, lol.

Sorry Alex to hijack your thread. :mrgreen:

2006 KJ · **Posted:** Sun Jun 05, 2011 10:25 pm

no problem! the project is coming along nicely... got a few things done this weekend. thinking of another picture to post... but dont know what's a good one that wont give it away.

KJWildman · **Posted:** Sun Jun 05, 2011 10:41 pm

You give away your secret project and I'll give away mine!! No, not the V8 ... the other one! :twisted:

tommudd · **Posted:** Mon Jun 06, 2011 7:36 am

KJWildman wrote:

You give away your secret project and I'll give away mine!! No, not the V8 ... the other one! :twisted:

Funny
I know what they both are
By the way Alex, almost called you yesterday afternoon, was over your way, well was in Pittsburgh and ran up 79 north to catch the turnpike and thought you weren't too much farther away :banghead:

KJWildman · **Posted:** Mon Jun 06, 2011 10:11 am

tommudd wrote:

KJWildman wrote:

You give away your secret project and I'll give away mine!! No, not the V8 ... the other one! :twisted:

Funny
I know what they both are
By the way Alex, almost called you yesterday afternoon, was over your way, well was in Pittsburgh and ran up 79 north to catch the turnpike and thought you weren't too much farther away :banghead:

I guess some of us just aren't as "special" as you Tom! :ROTFL:

2006 KJ · **Posted:** Tue Jun 07, 2011 12:28 am

KJWildman wrote:

tommudd wrote:

KJWildman wrote:

You give away your secret project and I'll give away mine!! No, not the V8 ... the other one! :twisted:

Funny
I know what they both are
By the way Alex, almost called you yesterday afternoon, was over your way, well was in Pittsburgh and ran up 79 north to catch the turnpike and thought you weren't too much farther away :banghead:

I guess some of us just aren't as "special" as you Tom! :ROTFL:

Tommudd- i'm about a little less then an hour from the turnpike.. i assume you jumped on it at cranberry? However i'll be in pittsburgh from this friday to next sunday.. if that helps. haha. Let me know if your going to be around.. i'll make sure to pack some tools that would maybe, i dont know, help with the heist of our back bumper! it would be worth hog tying to the roof of my goat.

Wildman- I'm willing to talk... maybe exchange some 'info' regarding the projects. I have a feeling yours is going to much more wild then mine.

2006 KJ · **Posted:** Tue Jun 07, 2011 11:12 pm

ok ok.. here's another one

everything missing or covered in this picture is done.

KJWildman · **Posted:** Tue Jun 07, 2011 11:47 pm

Line - X - Diggerized?

okay ...... i don't have any more pics for another hint :juggle:

how about this .... I'll give you a number ....... 26 !

Quicksilversurf917 · **Posted:** Wed Jun 08, 2011 11:31 am

Alex, When is this project going to be completed? Any finish date yet?

STINGN · **Posted:** Wed Jun 08, 2011 5:09 pm

hmm...i would have to say its getting painted by the looks of that first picture it looked like a little corner where the hood/fender/mirror/door hit...and the rest is sanded, the ARB is off...hmmmm

arengant · **Posted:** Wed Jun 08, 2011 5:16 pm

KJwildman, are you lowering your control arms and cradle drop?

blackwidowkj06 · **Posted:** Wed Jun 08, 2011 5:34 pm

KJWildman · **Posted:** Wed Jun 08, 2011 7:02 pm

arengant wrote:

KJwildman, are you lowering your control arms and cradle drop?

Let's not clutter up 2006KJ's thread with that right now! :ROTFL:

2006 KJ · **Posted:** Thu Jun 09, 2011 9:33 pm

Quicksilversurf917 wrote:

Alex, When is this project going to be completed? Any finish date yet?

weeelllllllll i'm busy this weekend.. coming week... next weekend... and the weekend after that. SO not for probably another month or 2. there's not 'that' much left to do. ok well there is but in the big picture of things there's not much.

and wildman... i dont care at all what goes on.. or gets discussed in this thread.. especially if it's info on your project!

Neatus · **Posted:** Thu Jun 09, 2011 11:42 pm

Intrigued....

03CDKJ · **Posted:** Fri Jun 10, 2011 12:00 am

I know I know! :twisted:

I won't spoil the suprise... but if you've met alex you know he's been wanting to to this for some time now.... :wink:

dieselenthusiast · **Posted:** Fri Jun 10, 2011 12:14 am

03CDKJ wrote:

I know I know! :twisted:

I won't spoil the suprise... but if you've met alex you know he's been wanting to to this for some time now.... :wink:

Yeah, he was wanting to sell it, lol…… :goink:

03CDKJ · **Posted:** Fri Jun 10, 2011 12:31 am

dieselenthusiast wrote:

03CDKJ wrote:

I know I know! :twisted:

I won't spoil the suprise... but if you've met alex you know he's been wanting to to this for some time now.... :wink:

Yeah, he was wanting to sell it, lol…… :goink:

before that... :wink:

jeep project

Who is online