I have a grinding noise coming from my front driver side wheel when a make a right turn ?
driver side wheel bearing has been change a mouth ago by dealer
could it be : outer cv joint?
low control arm ball joint?
tie rod end ?
JBA 4.5 A-arm always well greased.
sway bar bushing had been change also recently.
thanks for your comments.

_________________
Libby 2004
Modified.

just for reference,

even though the hub was changed a month ago doesn't mean it isn't that same hub

depending on the particular make of the part they used when replacing it, the cheapo hubs have been known to last astounding numbers of miles before going kaput again.. like.. 2,000 miles and such

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632

well ,on the bill I have a MOPAR parts number for that hub #V2508352AA
I'll be very surprise that it could be the hub again cause prior to the replacement i had a howling sound at 39-50mph
coming from the front left and it stop after the replacement.

_________________
Libby 2004
Modified.