I am trying to order an OEM replacement leather seat cover for the driver's seat bottom of our 2005 KJ CRD Ltd. Using the 2005 parts CD I have, I have narrowed the part number down to either:

1BB51 1DBAA

or,

1BB51 1D1AA

Can anyone help to determine which number is the right one?

Thanks,

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP

I don't know, but there sure is a pretty big price difference between the two.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic

Happen to know if you can get replacements for the foam bolsters? My covers are in fine shape but the foam at the outside hips is falling apart from the inside.

Dan

_________________

2005 Silver CRD Limited
245/75R16 GoodYear Duratracs
Fumoto drain | ProVent CCV Filter
Stanadyne FM100 filter | Cummins fuel pump
GDE Eco | SEGR | BoulderBars | FrankenLift | Frankenskids

X2

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)

I could use both the cover and the foam. I did not think it was possible to order these parts.

_________________
2006 Jeep Liberty CRD Limited
Gen2 Fuel Head - Magnaflow Exhaust - Ram transmission swap - In-Tank Lift Pump
Moab Wheels - 245/75/R16 LR E Cooper Discoverer AT3 Tires - OME Lift 790/90009 948/60069 - Etecno Glow Plugs - V6 Airbox
RUNNING B100
Pic of my Jeep!

I too am experiencing the same problem with a ripped driver side seat cover.

My driver side leather seat cover has started to crack on the side of the seat closest to the door.

I went to an upholstery shop in town that works on boat and auto upholstery repair and got a quote of $75.00 to repair the tare on the side of the seat.

They told me that the sides of the seat are not made of leather but instead are made of a plastic composition fabric that simulates leather, this fabric tends to wear out quickly. The center part of the seat is made of leather and is not damaged.

He mentioned that the fake leather sides will deteriorate quickly and suggested replacing them with real leather to match the center part for an extra 150 dollars for ea seat, I opted out since the passenger side seat is still in good shape.

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

Well, the list is $669! Best price so far is about $450. I will probably have a local trim shop make a new one for about $300, installed, from high quality real leather.

BTW, this is just for ONE seat BOTTOM cushion.

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP

What a rip!!! Literally. They call it the Stealership for a reason. Sounds like I'm going to get some seat covers instead.

_________________
2006 Jeep Liberty CRD Limited
Gen2 Fuel Head - Magnaflow Exhaust - Ram transmission swap - In-Tank Lift Pump
Moab Wheels - 245/75/R16 LR E Cooper Discoverer AT3 Tires - OME Lift 790/90009 948/60069 - Etecno Glow Plugs - V6 Airbox
RUNNING B100
Pic of my Jeep!