I read plenty on a few sites and just went to order my OME 1.5" kit from Rocky Road Outfitters. Thankfully they are a great group of knowledge and honest but told me no where in the hell should anyone say 31x10.5 tires fit under my CRD with just that kit. Anyone have some proof and what exact tire I can use. This thing won't be offroading nor articulating at all. Its a DD and an occiasional curb hopper to park at beach or somethign like that.

Need suggestion asap!

_________________
**His** 97 TJ 4" Clayton Shortarm lift - Dana 30/44 Dynatrac Axles Trac-Lok 4.56's - Bilstein 5100's - GY DuraTrac 33's on 15" Soft 8's - much much more and built to crawl
**Hers** 05 KJ Limited CRD w/ many plans

Howdy moroney

couple of points - if you search on Rocky Road - several folks have had issues on customer service, not everyone but enough to be cautious.

also - you'd get a better response in the main CRD section - Tech tends to be solutions after the fact.

although for Tires sizes - there's also a general tires section and it includes a chart
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=551144#p551144


so 31x10.5 will probably need the OME and pinch weld hammering.
wheel backspacing can be a big issue too - if it's standard center - you'll scrape the outside of the wheel well.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

I am running 245/75s on Moabs with an OME lift. Just finished bending the pinch welds and molding the wheel well liner to prevent rubbing. I can't lift it any more or it will not fit in the garage.

_________________
2005 Sport CRD
GDE Eco Tune
245/75 on Moabs
Magnaflow (ish) exhaust