If I use a 2" body lift and 2" wheel spacers can I use 265/70/r17 with no problms?

Short answer: No

First, no body lifts on a KJ. 2" spacers will make the wheels stick out too far and will rip your fender flares off. 265/70/r17 are 32". Do some searching around the forum to find out what you need to run 32" tires on a KJ.

_________________
2004 Black Renegade, manual transmission, Frankenlifted, JBA 4.5 A-arms, 31" Super Swamper M16's on Pro Comp 8128 wheels, MagnaFlow exhaust, Volant cold air intake, and clear front signals.

Can you post a picture of the set up you're running now?

_________________
2004 Black Jeep Liberty Renegade 4x4 3.7L
Frankenlift II Baja
245/75/16 General Grabber AT2's

Headlights-3000k HID...illegal
Fog Lights-3000k HID...illegal
Tail Lights- black nightshade...illegal
Turn signals- clear lens w/ clear bulb...illegal
All windows- 5% tint...illegal

Cop following me...CRAP

Ok well i have a stock liberty 07 but found a deal on 4 goodyear mtr tires 265/70/r17 mounted on jeep moab wheels!! Now i gotta know what i should do to be able to use them

[img]IMG_20111025_213313[/img] [img]IMG_20111025_213328[/img]

If they are 17 inch then they are JK wheels which will not fit anyways due to different bolt pattern They are 5 on 5 we need 5 on 4.5 and the Moabs we use are 16 inch

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

The 17" Moabs have a different bolt pattern and will not fit on a KJ without adapters. If you get the adapters, then they will stick out too far and rub like crazy even with a 31" tire. That combo with a 32" tire isn't gonna happen on a KJ, unless you do some serious trimming (search KJWildman).

17" Moabs are easy to find, as nobody wants them. Look for the elusive 16" Moabs with a 245/75/R16, and get an OME lift or Frankenlift. This setup requires very little trimming and has been been proven to work on a KJ.

_________________
2004 Black Renegade, manual transmission, Frankenlifted, JBA 4.5 A-arms, 31" Super Swamper M16's on Pro Comp 8128 wheels, MagnaFlow exhaust, Volant cold air intake, and clear front signals.

Ah Wildman tried running 33s not 32s
I'm running 32s with no trimming just an ARB up front

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I know Wildman fit 33's, and you have 32's. But try running your Moabs/32's with 2" less backspacing (like he would need for the adapters) and I'd bet you'd have some problems.

_________________
2004 Black Renegade, manual transmission, Frankenlifted, JBA 4.5 A-arms, 31" Super Swamper M16's on Pro Comp 8128 wheels, MagnaFlow exhaust, Volant cold air intake, and clear front signals.

wow thank you! i almost made a big mistake