hey guys - I'm getting an MAF code error on my CRD (even when I plug it in) and I'm getting some low-end power loss. Was thinking about upgrading to the V6 airbox....will getting the V6 airbox solve my MAF problem assuming it's a faulty sensor on my current airbox?

No

the v6 airbox - will help keep water out of the air filter if you driving in heavy rains.

GDE Eco-tune is a great solution for MAF errors - otherwise you might want to change the sensor.


FYI - the Noob guide has a lot of good information http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=604519#p604519

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

You might try cleaning the connector plugs and the maf sensor. It's output is very sensitive to bad connections.

_________________
2006 Black Limited CRD