It is currently Fri Oct 03, 2025 4:34 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Jeep CRD cutting out fault, poss BCM unit?
PostPosted: Thu Jan 05, 2012 6:51 am 
Offline
LOST Newbie

Joined: Sun Mar 13, 2011 3:06 pm
Posts: 45
Hi again
I still have the same problem with my UK sPEC 2002 2.5 crd Limited 5-speed manual that the engine stops dead on at 3250rpm in 3/4/5 gears. I have tried all sorts to cure this but to no avail. Talking to a dealer today (to part ex car) & he asked about the BCM (Body Control Module) I did take the car to Jeep as it had an outstanding recall for this item & they re-flashed it with an update, since then I have had this fault & an alarm issue but am not sure what the BCM even does,anyone out there know or think this is a possible reason.The dealer who did the re-flash has since shut (sells KIA now). The code that comes up is for over fuel pressure, It seems to think the car has blown a fuel pipe so shuts the engine down?

Many thanks

Dave, Chesterfield UK (ps, the dealer offered £1650- £2000 for the car which is half what its worth!)


Top
 Profile  
 
 Post subject: Re: Jeep CRD cutting out fault, poss BCM unit?
PostPosted: Thu Jan 05, 2012 9:32 am 
Offline
LOST Junkie

Joined: Tue Jan 26, 2010 4:26 am
Posts: 844
Location: Hoedspruit , South Africa
tangov8 wrote:
Hi again
I still have the same problem with my UK sPEC 2002 2.5 crd Limited 5-speed manual that the engine stops dead on at 3250rpm in 3/4/5 gears. I have tried all sorts to cure this but to no avail. Talking to a dealer today (to part ex car) & he asked about the BCM (Body Control Module) I did take the car to Jeep as it had an outstanding recall for this item & they re-flashed it with an update, since then I have had this fault & an alarm issue but am not sure what the BCM even does,anyone out there know or think this is a possible reason.The dealer who did the re-flash has since shut (sells KIA now). The code that comes up is for over fuel pressure, It seems to think the car has blown a fuel pipe so shuts the engine down?

Many thanks

Dave, Chesterfield UK (ps, the dealer offered £1650- £2000 for the car which is half what its worth!)


The BCM has got very little to do with the engine.....it is the ECM that monitors and adjusts everything.
What exact error code do you get? I can look up the code in the 2002 2.5 CRD FSM I have to see what they suggest and if you PM me your E-mail address I can send you some PDF files for the 2002 2.5 CRD. :)

_________________
2002 Export CRD 2.5 Sport


Top
 Profile  
 
 Post subject: Re: Jeep CRD cutting out fault, poss BCM unit?
PostPosted: Sun Jan 08, 2012 4:51 pm 
Offline
LOST Newbie

Joined: Sun Mar 13, 2011 3:06 pm
Posts: 45
Thanks for everyones help while I have owned the Jeep, but p/x'd it against something else,shame as it suited my needs well & looked great for its age,however no one seems to be able to sort out its gremlims

kind regards

Dave, Land of the crooked spire,Chesterfield UK


Top
 Profile  
 
 Post subject: Re: Jeep CRD cutting out fault, poss BCM unit?
PostPosted: Sun Jan 08, 2012 8:33 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 03, 2007 2:07 am
Posts: 6217
Location: Colorado Baby!
Billwill wrote:
tangov8 wrote:
Hi again
I still have the same problem with my UK sPEC 2002 2.5 crd Limited 5-speed manual that the engine stops dead on at 3250rpm in 3/4/5 gears. I have tried all sorts to cure this but to no avail. Talking to a dealer today (to part ex car) & he asked about the BCM (Body Control Module) I did take the car to Jeep as it had an outstanding recall for this item & they re-flashed it with an update, since then I have had this fault & an alarm issue but am not sure what the BCM even does,anyone out there know or think this is a possible reason.The dealer who did the re-flash has since shut (sells KIA now). The code that comes up is for over fuel pressure, It seems to think the car has blown a fuel pipe so shuts the engine down?

Many thanks

Dave, Chesterfield UK (ps, the dealer offered £1650- £2000 for the car which is half what its worth!)


The BCM has got very little to do with the engine.....it is the ECM that monitors and adjusts everything.
What exact error code do you get? I can look up the code in the 2002 2.5 CRD FSM I have to see what they suggest and if you PM me your E-mail address I can send you some PDF files for the 2002 2.5 CRD. :)


2.5 CRD files are also included in the service manual files I had hosted.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com