Pics after my OME.

Front:
OME927s
NS131 Shocks
Two Conduit Nuts per side
No Top Plate

Rear:
OME731s
Monroe SensaTrac Load Leveling Shocks
Two Upper Isolators per side

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK

Good deal!!!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Looks great Marlon Glad your finally got it done!

_________________
Blood Clot Red 03 Punisher Edition
245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar, Mudd's Garage Rear Bumper
custom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501

Why Thank You, 501.

Very Good Deal, Tom.

... I'm still sore. But it's getting better by the day.

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK

Sore???
Come on now, you are less than half my age and I'm never sore after doing one, granted most times have help but...........

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Tomm...you know this younger generation likes to complain about everything...oh wait...I'm in that generation!

_________________
'05 Renny 6 speed
OME/Bilsteins, Spidertrax Wheel Spacers, Husky Liners all around, Gutter Guarded Grill, 1 ISO each side rear, Boilers top shims front. And a whole list of things yet to do.

Tom, you have to remember, I'm spoiled. At work, I have a $10,000 tool in my hand. Even after 550 Jeeps, I am nowhere near sore. I normally don't do mechanical stuff by myself (I can wire up some stuff in a few minutes though.... ), and I must have been pissed that day after all because I tightened up those lug nuts so much, I had to find a 8' long pipe to use as a breaker bar for the lug wrench!!! I think that's what really did it, I spent way too long trying to take the wheels off. But yeah the only help I had was with the dang UCA... heh

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK

I have a question, I see you are still running the factory UCA did you have any contact with the UCA and the Spring?

I put the same lift on and have slight contact on full droop. Did you shave down the UCA or is that to dangerous, I plan on ordering better UCA soon but in the mean time.

_________________
2010 KK Jeep Liberty Sport

Mopar Skids - Sky Slider Roof
OME Lift
Duratrac's 245/75 R16

John M.

I specifically asked what I would need for my lift in another thread and I bought what people told me.

Yeah I'm getting a very slight contact on full droop. I just found out today.

Oh well, guess I just have to take it apart again, install new arms, and maybe by then I can do even more tricks to lift it even higher since I'll have the clearance!!!

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK