I have a 2005 liberty sport 4x4 3.7 L
I want to replace my stock horn with an after market horn from Fiamm ( Fiamm 66059 ooga horn )
The after market horn is 12 volts and 10 amps
I no nothing about electrical at all.........can I just remove my stock horn and connect my new one to the factory wiring ?
the new horn has 10 amp writen on it and my fuse box has a 15 amp fuse for the stock horn so I guess all should be fine

Mant thanks !

Ben

I'm not sure of the power of the stock horn, but your safest way is to wire it with a relay.

PLENTY of diagrams on the interwebs.
https://www.google.com/search?q=horn+wiring+diagram

TOOT!

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3
Sold-1988 Suzuki Samurai
2002 Jeep TJ

Just unplug your stock and run wires to the new horns
I'm running the 4 horn set off of a Caddy Fleetwood Brougham and they have a nice sound to them
They are matched with A-C-D-AND F notes @ 120+ DB
Wired directly into the wiring of the stock horns
maybe better to wire in a resister but >..........

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thanks for the advise !

Ben

I wanted to do an oogah horn too. Make sure you post up a video when it's all done.

_________________
Doorless Liberty Instructions
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=59612&p=739557#p739557