Thanks to LIBERTYinLIBERTY for the idea in this post - http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=57010&p=720883&hilit=fence+post#p720883

Cost about $20 and a few hours of time, but my work ladder that is RARELY used is on the roof now.

_________________
06 KJ LTD 4x4 - 245/65/17 Discoverer AT3's, OME 927/948, HyperTech, Thrush Welded, 5% tint, DIY Fence post crossbars, fog/high beam mod, C3 Hitch, cut bumper, pinch welds..

Future: cargo roof basket, recovery points, skids..
"...to disarm the people - that was the best and most effectual way to enslave them." - George Mason

Sweet! Bid you have to bend the crossbars or did they clear being Straight?
I think i'm going to give this a shot!

_________________
06 Inferno Red KJ Limited 4x4 3.7

I just did this today following everything from the other post and mine barely clear by maybe 1/8 inch. I used satin black on the end pieces but used spray bedliner on the rails.

Sweet! Thanks for the info. I hope to start mine next week. I'll post some pics when I'm done.

_________________
06 Inferno Red KJ Limited 4x4 3.7