as in the title,does anyone have the wheel speed sensor wire part number?

Front Passenger side. Its frayed and I suspect replacement is the fix, not ust taping it up, correct?

_________________
2005 CRD Limited
added Mopar plates, snow, mud
Detours backbone (w/lp8500)
Skink super sliders

Not sure of the number, call local car parts supplier and ask for ABS sensor for that side. Comes with sensor and wire for around $30 or so. Be cautious removing the old sensor. Mine broke and I had to drill it out, I drilled too deep and damged the ring gear, had to replace that also.

If your ABS light is not on then just tape it for now and see what happens.

_________________
2007 Grand Cherokee CRD, GDE ECO and DPF delete.
2006 CRD Limited, GDE ECO Full TQ and TCM tunes. SOLD

thanks, I didn't realize the cable came with the sensor. ordered one.

fyi, the left driver side is < 30
the passenger side I couldn't find for under 40.

ABS light is on.

_________________
2005 CRD Limited
added Mopar plates, snow, mud
Detours backbone (w/lp8500)
Skink super sliders

Isn't the ABS sensor a part of the wheel bearing? I know mine is....

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings

you can order the sensor/cable separate ($) or as part of the hub assembly ($$$)

_________________
2005 CRD Limited
added Mopar plates, snow, mud
Detours backbone (w/lp8500)
Skink super sliders

in case anyone has this issue

i ordered part SU8068 from autozone

its made by wells electronics

and i'd try and squirt some loosener or something in the area where it inserts into the hub a day early if you can.

the plastic on mine was somewhat "welded" to the hub assembly, it broke off with little effort. i ended up having to drill, tweeze, drill, tweeze, and then use an easy out to pull the bottom of the old plug out. it was a royal pia.

and the ABS light did not go out until after i backed up in the driveway and started moving forward.

_________________
2005 CRD Limited
added Mopar plates, snow, mud
Detours backbone (w/lp8500)
Skink super sliders

It appears this is common. It seems the pax side always goes first. When mine went my odometer stopped working. The speedo was fine, but the od and trip meter wouldnt work. I had it replaced while in the road in Phoenix.

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

same here, no odometer.

i guess its common for me to break a part every now and then when repairing(more like maint as it was brakes) something else

luckily it was not to pricey and I was able to repair it fairly easily.

_________________
2005 CRD Limited
added Mopar plates, snow, mud
Detours backbone (w/lp8500)
Skink super sliders