What have you done to your KK lately

cgass · **Posted:** Tue Aug 14, 2012 11:48 pm

I've got to add some of those spacers coupled with a rear iso per side just to level out the stance. Problem is, I wouldn't fit in my garage anymore.

Sent from my Galaxy Nexus using Tapatalk 2

Ted15 · **Posted:** Wed Aug 15, 2012 12:34 am

cgass wrote:

I've got to add some of those spacers coupled with a rear iso per side just to level out the stance. Problem is, I wouldn't fit in my garage anymore.

Sent from my Galaxy Nexus using Tapatalk 2

You'll need more than a couple iso's I think. I put two spacers in and a two inch spacer on the rear. It's probably a little too much. If I can find a set of 1 1/2" spacers I'd probably change them out. :frankie:

isomswim · **Posted:** Thu Aug 16, 2012 5:52 pm

Bought new speakers today. Polk Audio Dxi 650
start working on it tomorrow but will take a couple days. Running all new wire and amp

jjohnson1892 · **Posted:** Thu Aug 16, 2012 9:23 pm

Put on 4 KC HiLites Daylighters on my RRO light bar (on Adventure Rack) :pepper:

tommudd · **Posted:** Thu Aug 16, 2012 11:50 pm

WOW
tree knockers
or maybe you live where there aren't any trees / low hanging branches

teckman02 · **Posted:** Fri Aug 17, 2012 1:08 pm

tommudd wrote:

WOW
tree knockers
or maybe you live where there aren't any trees / low hanging branches

X2

isomswim · **Posted:** Fri Aug 17, 2012 5:57 pm

Just finished day 1 of wiring up new speakers and amp. OMG last time I do this with a new Jeep.

JeepMonkey190 · **Posted:** Fri Aug 17, 2012 6:24 pm

isomswim wrote:

Just finished day 1 of wiring up new speakers and amp. OMG last time I do this with a new Jeep.

Oh it's not that bad I just finished putting in a new 2DIN stereo and a custom sub box. I am going to try and take some pictures this weekend of it. But at least you don't have to drill any holes anywhere in the plastic molding like I did, or did you? it's pretty scary stuff. Especially in the liberty because before you know it you have disassembled the whole interior.

isomswim · **Posted:** Fri Aug 17, 2012 6:35 pm

JeepMonkey190 wrote:

isomswim wrote:

Just finished day 1 of wiring up new speakers and amp. OMG last time I do this with a new Jeep.

Oh it's not that bad I just finished putting in a new 2DIN stereo and a custom sub box. I am going to try and take some pictures this weekend of it. But at least you don't have to drill any holes anywhere in the plastic molding like I did, or did you? it's pretty scary stuff. Especially in the liberty because before you know it you have disassembled the whole interior.

I ran all new wiring from the speakers. Amp is about 75 watts x4 @ 4ohms. Stock wire can not handle that for long. The worst part was trying to get new wire through the front doors. I'm going to get a sub but want something that will fit under a set somewhere or really small with decent bass.

jjohnson1892 · **Posted:** Sat Aug 18, 2012 5:46 pm

tommudd wrote:

WOW
tree knockers
or maybe you live where there aren't any trees / low hanging branches

Not bad actually. They sit higher than I thought but I haven't had any issues just yet, crossing my fingers though :roll:

Bmxer524 · **Posted:** Sun Aug 19, 2012 10:56 pm

jjohnson1892 wrote:

Not bad actually.

That's what my dad and his friends said when he was taking his old Bronco through a covered bridge upstate. "Oh it'll make it through Jimmy." The lights were hanging by the wires after that bridge. :-)r

JeepNCrowd · **Posted:** Sun Aug 19, 2012 11:55 pm

After some pounding, 2 days of painting, and a broken drill bit, I finally installed my JCR rock sliders. Time to test them out!!

isomswim · **Posted:** Mon Aug 20, 2012 1:33 pm

Radio all wired up and working. OMG so loud. And thats without my Polk dash speakers wired. Gain is down pretty far and still gets pretty loud. Loudest car I've ever done but definitely the hardest to wire. Had to remove back seat so I will post some pics of that soon. That's all for now

jjohnson1892 · **Posted:** Mon Aug 20, 2012 9:30 pm

Bmxer524 wrote:

jjohnson1892 wrote:

Not bad actually.

That's what my dad and his friends said when he was taking his old Bronco through a covered bridge upstate. "Oh it'll make it through Jimmy." The lights were hanging by the wires after that bridge. :-)r

Hope that doesn't happen to me. I'm trying to get a hold of a friend who can help me weld on some tabs directly onto my roof rack. I have been a touch concerned but at the moment I'm not going into parking decks or through low hanging branches/low clearance bridges just yet.

Just finished plasti dipping my Jeep, looks awesome so far. I'd get pictures but it's pitch black out :roll:

After I get to school I'll have pictures up

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

Just made a laptop mount in my cup holder...
It's holding up pretty well...

A cheap way to get thing done...

Roastbeef · **Joined:** Sun Jun 03, 2012 7:31 pm **Posts:** 199

I'm being a copy cat but I plasti dipped my grill grey.

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

Roastbeef wrote:

I'm being a copy cat but I plasti dipped my grill grey.

It looks good...
How many layers did you paint?

Roastbeef · **Joined:** Sun Jun 03, 2012 7:31 pm **Posts:** 199

I'm not sure, I used a whole can. It was just really so you couldn't see the orange red color anymore but it turned out thick and driven about 400 miles with no chips

Cherrie 274 · **Posted:** Tue Aug 21, 2012 10:18 pm

lammarco wrote:

Just made a laptop mount in my cup holder...
It's holding up pretty well...

A cheap way to get thing done...

WHY?
Bored driving?

Ted15 · **Posted:** Wed Aug 22, 2012 2:53 am

Roastbeef wrote:

I'm being a copy cat but I plasti dipped my grill grey.

Who's KK is that? The one you copied. Are those 32" or33" tires on it?

What have you done to your KK lately

Who is online