Hey guys. Just trying to plan my future build. I've been reading on here that the 4 cyl KJ's had 4.10's in the front diff. Does anyone know if that's true for ALL 4cyl KJ's? Just want to be prepared before I start hunting one down in the future.

-jordan

Yes all 4 cylinder gas KJs had 4.10s
find one and you're good.
here in Ohio around 250-300 is going rate it seems

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thanks!

Swapping the front differential is not a lot of fun but for 300 bucks for a stock 4.10 set that ain't bad. If I hadn't had a buddy install mine fore me it would of been 100 more then that with parts and labor.

_________________
My CRD Build Thread
Soon to Come:more lights

Yeah, I'm just trying to feel out my options now. At 300ish for the axle, plus a weekend of frustration to swap it out it is probably my best option. Financially at least...

Not that hard to swap out, few hours time, an afternoon is all unless your's is all rusted up underneath

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited