Is Indiana dead

tommudd · **Posted:** Tue Jan 08, 2013 4:35 pm

And PICTURES!!!!!!

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

21.5 in the front half and 21 in the rear half

tommudd · **Posted:** Tue Jan 08, 2013 8:14 pm

Wait I thought your buddy got 3 inch springs made??

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

I thought so too. Maybe he ment 3" from where i was... *shrug* ...gift horse and all that...ill still take 2" off stock

tommudd · **Posted:** Tue Jan 08, 2013 8:57 pm

Yep no matter what you still got some lift and you can always add to it with top plates/clevis etc

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

Yeah i need to get some bigger better tires for sure...will 245s fit under that without rubbing?

I also take it u didnt like my offer on ur 4xguard huh?

tommudd · **Posted:** Tue Jan 08, 2013 9:23 pm

At 21.5 you'll have to pound over the pinch welds and also more than likely do some trimming on the bumper

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

Well i might just have to run what ive got til i can afford bigger and better than

Liberator4x4 · **Joined:** Mon Aug 13, 2012 12:04 am **Posts:** 29

I was just about to order a rear bumper from rocklizard to go with my new arb when I noticed something this thing has no place for a licence plate where am I suppose to put it?

http://www.rocklizardfabrications.com/IMGP4090.JPG

tommudd · **Posted:** Tue Jan 08, 2013 11:27 pm

Liberator4x4 wrote:

I was just about to order a rear bumper from rocklizard to go with my new arb when I noticed something this thing has no place for a licence plate where am I suppose to put it?

http://www.rocklizardfabrications.com/IMGP4090.JPG

Bracket coming out through the center of the wheel works
I have one over here I made before for one
spins on and off with a quick disconnect for the light
or just go whole hog like mine :wink:

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

I wish i could afford an arb let alone an arb plus a RL rear bumper...doo doo i cant even afford a couple of skids right now...need to realign...need gas...its bad enough that i will be driving my wife's turd more just so i can save money and tires

need to wait a couple of paychecks to catch up. Kids are expensive, jeep repairs and it looks like i have a 16 hr round trip in my very near future because my Dad just got upgraded to the ICU at the hospital...oh poopy times...

tommudd · **Posted:** Wed Jan 09, 2013 9:58 am

Shop around, look for deals you never know what you'll find :wink:

Liberator4x4 · **Joined:** Mon Aug 13, 2012 12:04 am **Posts:** 29

tommudd wrote:

Liberator4x4 wrote:

I was just about to order a rear bumper from rocklizard to go with my new arb when I noticed something this thing has no place for a licence plate where am I suppose to put it?

http://www.rocklizardfabrications.com/IMGP4090.JPG

Bracket coming out through the center of the wheel works
I have one over here I made before for one
spins on and off with a quick disconnect for the light
or just go whole hog like mine :wink:

Is there any way you can post a pic of that bracket? I'm honesty not a fan of the one you have I think it looks to bulky and I hate that the spare is off to the side

tommudd · **Posted:** Wed Jan 09, 2013 7:46 pm

Bulky???

Both are the same size, just yours would be lighter weight steel
also spare off to the side is what I like about it, looks way better than in the center
Ran it for a while with it mounted in the stock location but hated it
Looks just like any other KJ, now people ask me what it is since it looks so much different :wink:

I'll have to dig out the bracket, its up in the attic of the garage.
heres some with the spare in the stock location and license plate mounted middle of the tire

Liberator4x4 · **Joined:** Mon Aug 13, 2012 12:04 am **Posts:** 29

tommudd wrote:

Bulky???

Both are the same size, just yours would be lighter weight steel
also spare off to the side is what I like about it, looks way better than in the center
Ran it for a while with it mounted in the stock location but hated it
Looks just like any other KJ, now people ask me what it is since it looks so much different :wink:

I'll have to dig out the bracket, its up in the attic of the garage.
heres some with the spare in the stock location and license plate mounted middle of the tire

You can ask mod my jeep always seems to have someone checking it out I have had people follow me to ask questions about it several times so I don't mind a part being not clearly noticeable that its not stock.

Liberator4x4 · **Joined:** Mon Aug 13, 2012 12:04 am **Posts:** 29

Also thanks for the pics you changed my mind on not buying it, Il probably order it tomorrow, how well does it fit with a oversized tire?

tommudd · **Posted:** Wed Jan 09, 2013 8:40 pm

245-75s will fit pretty good
any larger and you'll need to make a bracket and raise the tire up about 3 inches
another reason I ended up installing the carrier, ( plus the fact I had it so why not use it) :wink:

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

well i feel better...durring my drive down to the southern part of the state i saw 6 lifted libertys and got 3 jeep waves

those are the first waves i have ever gotten

tommudd · **Posted:** Thu Jan 10, 2013 12:05 am

Six ??? dang

MoD · **Joined:** Sat Mar 17, 2012 12:53 am **Posts:** 1343

well it was a 8 hr drive...and we are in 4x4 country where if a truck isnt lifted then its not a truck

liberator...i look forward to seeing that bumper on your jeep...in about 2 years...

Is Indiana dead

Who is online